Pretraga

Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 1239487

Reverse Engineering and 3D Printing of the Spinning Reel: From Maintenance to the New Product Design

Vukašinović, Josip; Grgić, Ivan; Marijić. Jure; Karakašić, Mirko
Reverse Engineering and 3D Printing of the Spinning Reel: From Maintenance to the New Product Design // Proceedings of 31st International Conference on Organization and Technology of Maintenance (OTO 2022) / Blažević, Damir ; Ademović, Naida ; Barić, Tomislav ; Cumin, Josip ; Desnica, Eleonora (ur.).
Osijek, Hrvatska: Springer Cham ; Springer Nature, 2022. str. 106-117 doi:.org/10.1007/978-3-031-21429-5_10 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

CROSBI ID: 1239487 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Reverse Engineering and 3D Printing of the Spinning Reel: From Maintenance to the New Product Design

Autori
Vukašinović, Josip ; Grgić, Ivan ; Marijić. Jure ; Karakašić, Mirko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of 31st International Conference on Organization and Technology of Maintenance (OTO 2022) / Blažević, Damir ; Ademović, Naida ; Barić, Tomislav ; Cumin, Josip ; Desnica, Eleonora - : Springer Cham ; Springer Nature, 2022, 106-117

ISBN
978-3-031-21429-5

Skup
31st International Conference on Organization and Technology of Maintenance (OTO 2022)

Mjesto i datum
Osijek, Hrvatska, 12.12.2022

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Bearing ; Spinning Reel ; Housing ; Maintenance ; Reverse Engineering ; 3D Printing

Sažetak
The intensive use of products such as fishing reels in a wet atmosphere near the rivers, seas, and lakes, brings more often need for their maintenance. The chance of malfunctioning is rising in the case of irregular care. In this case, using the principles of reverse engineering and the fused deposition modelling method for 3D printing of parts, the maintaining process of a technical system such as a spinning reel was researched. The Shimano AX 4000FB fishing reel was completely reassembled. All parts of the assembly were checked and the complexity of the disassembly/assembly process was analysed. Considering this, the redesign of the existing spinning reel model Shimano AX 4000FB was proposed using CATIA V5 software to facilitate maintenance. The redesigned parts were printed using the low-cost Creality Ender 3 3D printer. Some parts of the spinning reel were kept, while most of the parts were 3D printed. The housing of the featured spinning reel now consists of three parts instead of two to facilitate easier disassembly and maintenance approach. The thickness of the housing wall has been increased to ensure better resistance to excessive dynamic loads. The bearing bushes were replaced by two ball bearings. After assembling, functionality was tested in the real environment and no problems were encountered.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo, Dizajn



POVEZANOST RADA

Ustanove:
Strojarski fakultet, Slavonski Brod,
Sveučilište u Slavonskom Brodu

Profili:

Avatar Url Ivan Grgić (autor)

Avatar Url Mirko Karakašić (autor)

Avatar Url Jure Marijić (autor)

Poveznice na cjeloviti tekst rada:

doi link.springer.com

Citiraj ovu publikaciju:

Vukašinović, Josip; Grgić, Ivan; Marijić. Jure; Karakašić, Mirko
Reverse Engineering and 3D Printing of the Spinning Reel: From Maintenance to the New Product Design // Proceedings of 31st International Conference on Organization and Technology of Maintenance (OTO 2022) / Blažević, Damir ; Ademović, Naida ; Barić, Tomislav ; Cumin, Josip ; Desnica, Eleonora (ur.).
Osijek, Hrvatska: Springer Cham ; Springer Nature, 2022. str. 106-117 doi:.org/10.1007/978-3-031-21429-5_10 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Vukašinović, J., Grgić, I., Marijić. Jure & Karakašić, M. (2022) Reverse Engineering and 3D Printing of the Spinning Reel: From Maintenance to the New Product Design. U: Blažević, D., Ademović, N., Barić, T., Cumin, J. & Desnica, E. (ur.)Proceedings of 31st International Conference on Organization and Technology of Maintenance (OTO 2022) doi:.org/10.1007/978-3-031-21429-5_10.
@article{article, author = {Vuka\v{s}inovi\'{c}, Josip and Grgi\'{c}, Ivan and Karaka\v{s}i\'{c}, Mirko}, year = {2022}, pages = {106-117}, DOI = {doi.org/10.1007/978-3-031-21429-5\_10}, keywords = {Bearing, Spinning Reel, Housing, Maintenance, Reverse Engineering, 3D Printing}, doi = {doi.org/10.1007/978-3-031-21429-5\_10}, isbn = {978-3-031-21429-5}, title = {Reverse Engineering and 3D Printing of the Spinning Reel: From Maintenance to the New Product Design}, keyword = {Bearing, Spinning Reel, Housing, Maintenance, Reverse Engineering, 3D Printing}, publisher = {Springer Cham ; Springer Nature}, publisherplace = {Osijek, Hrvatska} }
@article{article, author = {Vuka\v{s}inovi\'{c}, Josip and Grgi\'{c}, Ivan and Karaka\v{s}i\'{c}, Mirko}, year = {2022}, pages = {106-117}, DOI = {doi.org/10.1007/978-3-031-21429-5\_10}, keywords = {Bearing, Spinning Reel, Housing, Maintenance, Reverse Engineering, 3D Printing}, doi = {doi.org/10.1007/978-3-031-21429-5\_10}, isbn = {978-3-031-21429-5}, title = {Reverse Engineering and 3D Printing of the Spinning Reel: From Maintenance to the New Product Design}, keyword = {Bearing, Spinning Reel, Housing, Maintenance, Reverse Engineering, 3D Printing}, publisher = {Springer Cham ; Springer Nature}, publisherplace = {Osijek, Hrvatska} }

Časopis indeksira:


  • Scopus

Citati:

    Altmetrijski pokazatelji:


    Podijeli:





    Contrast
    Increase Font
    Decrease Font
    Dyslexic Font
    CROSBI koristi kolačiće (cookies) kako bi poboljšao funkcionalnost stranice.