Pregled bibliografske jedinice broj: 1224261
Critical parameters for the mix design of slag-based alkali-activated concrete
Critical parameters for the mix design of slag-based alkali-activated concrete // 5th International Scientific Conference iNDiS
Novi Sad, Srbija, 2021. str. 569-576 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 1224261 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Critical parameters for the mix design of slag-based
alkali-activated concrete
Autori
Bukvić, Olivera ; Runci, Antonino ; Serdar, Marijana
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
5th International Scientific Conference iNDiS
/ - , 2021, 569-576
ISBN
978-86-6022-253-6
Skup
"iNDiS2021" Planning, design, construction and building renewal
Mjesto i datum
Novi Sad, Srbija, 24.11.2021. - 26.11.2021
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
alkali-activated slag concrete, mix design, slump, compressive strength
Sažetak
This paper presents the results of experimental research on critical mix design parameters affecting workability and mechanical properties of alkali-activated slag-based concrete. Ground granulated blast furnace slag was used as a precursor and sodium hydroxide and sodium silicate as activators. Water to binder ratio, alkali content and silica modulus were varied as key parameters in ten alkali-activated concrete mixes. Consistence was measured by slump test and compressive strength test was performed on 150 mm cube samples. Based on the obtained results, the interdependency of critical mix design parameters and their optimal values were defined.
Izvorni jezik
Engleski
Znanstvena područja
Temeljne tehničke znanosti
POVEZANOST RADA
Projekti:
EK-H2020-Grant agreement ID: 813596 - DuRSAAM (EK ) ( CroRIS)
Ustanove:
Sveučilište u Zagrebu
