Pretraga

Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 1184101

Residual Stress in Pipe Joints Welded with Base and Cellulose Coated Electrode

Bajtarević, Amna; Vukojević, Nedeljko; Hadžikadunić, Fuad; Kačmarčik, Josip; Talić- Čikmiš, Amra
Residual Stress in Pipe Joints Welded with Base and Cellulose Coated Electrode // Machine and Industrial Design in Mechanical Engineering. KOD 2021. Mechanisms and Machine Science / Rackov, Milan ; Mitrović, Radivoje ; Čavić, Maja (ur.).
Novi Sad, Srbija: Springer, 2022. str. 289-298 doi:10.1007/978-3-030-88465-9_26 (predavanje, recenziran, cjeloviti rad (in extenso), znanstveni)

CROSBI ID: 1184101 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Residual Stress in Pipe Joints Welded with Base and Cellulose Coated Electrode

Autori
Bajtarević, Amna ; Vukojević, Nedeljko ; Hadžikadunić, Fuad ; Kačmarčik, Josip ; Talić- Čikmiš, Amra

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Machine and Industrial Design in Mechanical Engineering. KOD 2021. Mechanisms and Machine Science / Rackov, Milan ; Mitrović, Radivoje ; Čavić, Maja - : Springer, 2022, 289-298

ISBN
978-3-030-88465-9

Skup
11th International Conference on Machine and Industrial Design in Mechanical Engineering (KOD 2021)

Mjesto i datum
Novi Sad, Srbija, 10.06.2021. - 12.06.2021

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Recenziran

Ključne riječi
Pipe joint, Residual stress, Weld Coated electrodes

Sažetak
The residual stress, that often occurs as consequence of the uneven heat distribution is common phenomenon for welded constructions. Possible consequences of residual stress are construction deformation, stress corrosion and fractures. Appearance of residual stress and deformation cannot be eliminated in total, but its intensity could be controlled by means of design and technological solutions. Thus, it is important to optimize the parameters of construction during designing phase. In this paper, a study conducted in order to find optimized technological solution for a welded pipe joint is presented. In the study, two technological solutions for the joint were compared by residual stress measuring with the “hole-drilling” method. The major difference between two technological solutions was the electrode type used during electric arc welding. Measurements were conducted on samples welded with base coated electrode and with cellulose coated electrode. According to the experts in this field, cellulose coated electrodes are more appropriate from economic and technological point of view. The purpose of this paper is the validation of cellulose coated electrode welded joints quality based on residual stress. Intensity and direction of residual stress at three measuring points of each sample were measured and compared.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA

Profili:

Avatar Url Josip Kačmarčik (autor)

Poveznice na cjeloviti tekst rada:

doi link.springer.com

Citiraj ovu publikaciju:

Bajtarević, Amna; Vukojević, Nedeljko; Hadžikadunić, Fuad; Kačmarčik, Josip; Talić- Čikmiš, Amra
Residual Stress in Pipe Joints Welded with Base and Cellulose Coated Electrode // Machine and Industrial Design in Mechanical Engineering. KOD 2021. Mechanisms and Machine Science / Rackov, Milan ; Mitrović, Radivoje ; Čavić, Maja (ur.).
Novi Sad, Srbija: Springer, 2022. str. 289-298 doi:10.1007/978-3-030-88465-9_26 (predavanje, recenziran, cjeloviti rad (in extenso), znanstveni)
Bajtarević, A., Vukojević, N., Hadžikadunić, F., Kačmarčik, J. & Talić- Čikmiš, A. (2022) Residual Stress in Pipe Joints Welded with Base and Cellulose Coated Electrode. U: Rackov, M., Mitrović, R. & Čavić, M. (ur.)Machine and Industrial Design in Mechanical Engineering. KOD 2021. Mechanisms and Machine Science doi:10.1007/978-3-030-88465-9_26.
@article{article, author = {Bajtarevi\'{c}, Amna and Vukojevi\'{c}, Nedeljko and Had\v{z}ikaduni\'{c}, Fuad and Ka\v{c}mar\v{c}ik, Josip and Tali\'{c}- \v{C}ikmi\v{s}, Amra}, year = {2022}, pages = {289-298}, DOI = {10.1007/978-3-030-88465-9\_26}, keywords = {Pipe joint, Residual stress, Weld Coated electrodes}, doi = {10.1007/978-3-030-88465-9\_26}, isbn = {978-3-030-88465-9}, title = {Residual Stress in Pipe Joints Welded with Base and Cellulose Coated Electrode}, keyword = {Pipe joint, Residual stress, Weld Coated electrodes}, publisher = {Springer}, publisherplace = {Novi Sad, Srbija} }
@article{article, author = {Bajtarevi\'{c}, Amna and Vukojevi\'{c}, Nedeljko and Had\v{z}ikaduni\'{c}, Fuad and Ka\v{c}mar\v{c}ik, Josip and Tali\'{c}- \v{C}ikmi\v{s}, Amra}, year = {2022}, pages = {289-298}, DOI = {10.1007/978-3-030-88465-9\_26}, keywords = {Pipe joint, Residual stress, Weld Coated electrodes}, doi = {10.1007/978-3-030-88465-9\_26}, isbn = {978-3-030-88465-9}, title = {Residual Stress in Pipe Joints Welded with Base and Cellulose Coated Electrode}, keyword = {Pipe joint, Residual stress, Weld Coated electrodes}, publisher = {Springer}, publisherplace = {Novi Sad, Srbija} }

Časopis indeksira:


  • Scopus

Citati:

    Altmetrijski pokazatelji:


    Podijeli:





    Contrast
    Increase Font
    Decrease Font
    Dyslexic Font
    CROSBI koristi kolačiće (cookies) kako bi poboljšao funkcionalnost stranice.