Pregled bibliografske jedinice broj: 1167654
Image analysis system in dental materials research
Image analysis system in dental materials research // Abstracts of 20th Annual Conference od European Prosthodontic Association (EPA)
Tübingen: European Prosthodontic Association (EPA), 1996. str. 109-109 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 1167654 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Image analysis system in dental materials research
Autori
Vojvodic, Denis ; Jerolimov, Vjekoslav ; Indof, Janez ; Catovic, Adnan ; Husic, Suhreta
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Abstracts of 20th Annual Conference od European Prosthodontic Association (EPA)
/ - Tübingen : European Prosthodontic Association (EPA), 1996, 109-109
Skup
20th Annual Conference od European Prosthodontic Association (EPA)
Mjesto i datum
Tübingen, Njemačka, 19.09.1996. - 21.09.1996
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
dental materials, microscopy, image analysis
Sažetak
Research projects in a field of dental materials can not be realised without support of a modern microscopy. Most widely used scanning electron microscopy (SEM) has some disadvantages especially corsidering non-metal parts of investigated samples. Since non-metal parts are not electrically conductive, such samples should be sputter-coated to become visible. Light microscopy can provide satisfactory results with skilled operator, but manual methods are time consuming and reproducibility of results is questionable. Analysis time can be reduced and reproducibility improved with the use of an automatic image analyser. The image may either be digitized directly in the microscope or from photomicrograph, and a contrast in the samples converted to a finite number of gray levels, usually 256, which is more than enough for accurate analysis. In this study light mrcroscope Otynryus BfM2-UMA and image analyser Leco L2001 were used to investigate the rmarginal gap between metal surface and composite veneer. Samples were analysed 24 hours after polymerisation, after thermocycling and after storage in a distilled water for 28 days. Considering the accurary of the data obtained it can be concluded that image analysis system is of a great help in dental materials research and could be more widely used.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo, Dentalna medicina
POVEZANOST RADA
Ustanove:
Stomatološki fakultet, Zagreb,
Fakultet strojarstva i brodogradnje, Zagreb,
Klinička bolnica "Dubrava"
Profili:
Denis Vojvodić
(autor)
Janez Indof
(autor)
Šuhreta Husić
(autor)
Adnan Ćatović
(autor)
Vjekoslav Jerolimov
(autor)