Naslov
Digital light processing in photoelastic models production for material behavior modeling

Autori
Dundović, Maja ; Marković, Kristina ; Franulović, Marina ; Vrcan, Željko

Izvornik
Procedia Structural Integrity (2452-3216) 31 (2021); 111-115

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Photoelasticity ; Digital Light Processing (DLP) ; Pure bending test ; Material behavior modeling

Sažetak
Material behavior modeling for additive manufacturing (AM) technology represents a challenge because the manufacturing process and post-processing parameters strongly influence the mechanical properties of the part. Photoelasticity is a well-known full-field optical technique used for direct stress/strain determination and design evaluation purposes. A novel use of digital light processing (DLP), a form of vat polymerization AM technologies in photoelastic specimen production is discussed in this paper. A number of preliminary experiments were undertaken to address critical issues related to DLP process. It was concluded that the UV exposure time, dependent mostly on layer thickness, and orientation are the main factors affecting the mechanical properties and the accuracy of the printed samples. Pure bending test was used to determine mechanical and photoelastic properties of a commercially available acrylic-based photopolymer, not previously reported in the literature. The rectangular beam sample used was built in vertical layer orientation and fully-cured. The estimated value of Young’s modulus was within the expected range for acrylics, and the photoelastic constant obtained provides increased confidence in the investigated acrylic polymer for photoelastic stress analysis purposes, and consequently for validation of computer-based models.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA