Pregled bibliografske jedinice broj: 1150820
Increasing wear resistance of steel rings for sliding bearings by surface engineering procedures
Increasing wear resistance of steel rings for sliding bearings by surface engineering procedures // Proceedings of the 21th International Conference on Materials, Tribology and Recycling / Ćorić, Danko ; Šolić, Sanja ; Ivušić, Franjo (ur.).
Varaždin: Hrvatsko društvo za materijale i tribologiju (HDMT), 2021. str. 314-325 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 1150820 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Increasing wear resistance of steel rings for
sliding bearings by surface engineering procedures
Autori
Landek, Darko ; Zhao, Linruo ; Yang, Qi ; Dadouche, Azzedine
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 21th International Conference on Materials, Tribology and Recycling
/ Ćorić, Danko ; Šolić, Sanja ; Ivušić, Franjo - Varaždin : Hrvatsko društvo za materijale i tribologiju (HDMT), 2021, 314-325
Skup
21th International Conference on Materials (MATRIB 2021)
Mjesto i datum
Vela Luka, Hrvatska, 30.06.2021. - 02.07.2021
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
sliding bearing, friction factor, salt bath nitriding, plasma nitriding, PVD, PACVD
Sažetak
The paper compares the possibilities of increasing the wear resistance of the sliding surface of steel rings EN DIN 100Cr6 (ASTM 52100) by nitriding processes in plasma and by coating processes from the vapor phase, PVD and PACVD. On the nitrated and coated bearing rings, the surface roughness was measured, the thickness and adhesion of the coatings were determined, and the friction coefficient and adhesion wear were tested by the sliding method “Block on Ring” Based on the test results for highly loaded sliding surfaces, the use of PACVD TiCN / TiN and PVD TiN coatings with good wear resistance and dry friction coefficient less than 0.1 is recommended.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
