Naslov
Analysis of the Accuracy of Mass Difference-Based Measurement of Dry Clutch Friction Material Wear

Autori
Hoić, Matija ; Miklik, Alen ; Kostelac, Milan ; Deur, Joško ; Tissot, Andreas

Izvornik
Materials (1996-1944) 14 (2021), 18; 5356, 17

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
dry clutch ; experimental characterization ; moisture influence ; measurement ; testing ; wear

Sažetak
The paper demonstrates that the dry clutch friction plate wear rate, measured based on the plate mass difference method, exhibits a transient behavior after each change of friction interface temperature level. The effect is hypothesized to be caused by a temperature-dependent change in the moisture content/mass level in the friction material. To test this hypothesis, a series of synchronized characterization experiments have been conducted by using two friction plates, one for wear tests and the other for drying in an oven under the same temperature conditions. Based on the analysis of test results, a moisture content compensation procedure, which reduces the transient wear rate from being 100% to being 50% higher compared to stabilized wear rate, is proposed and verified. The gained insights are used to set recommendations on the organization of routine wear characterization experiments aimed at avoiding the effect of moisture content influence on the accuracy of wear measurement. The main recommendations are to minimize the number of temperature target level changes through proper design of the experiment, insert a run-in test after every long test pause, and execute a pre-heat, blind wear test at the beginning of each test day.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA