Naslov
Fatigue numerical analysis comparison on bicycle pedal example using different software

Autori
Varda, Kenan ; Bešlagić, Ernad ; Kačmarčik, Josip ; Zaimović-Uzunović, Nermina

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
CONFERENCE PROCEEDINGS: MECHANICAL TECHNOLOGIES AND STRUCTURAL MATERIALS / Jozić, Sanja ; Lela, Branimir ; Gjeldum, Nikola - Split : Hrvatsko društvo za strojarske tehnologije, 2021, 153-158

Skup
10th International Conference Mechanical Technologies and Structural Materials (MTSM 2021)

Mjesto i datum
Split, Hrvatska, 23.09.2021. - 24.09.2021

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Recenziran

Ključne riječi
Fatigue, Analysis, Damage, Pedal

Sažetak
The topic of this paper is the analysis of the stress states and material fatigue on the example of a bicycle pedal. The bicycle pedal was made of unnotched 6061-T6 aluminum alloy and the data used in the analysis were created using the S/N curve for a given material. In the SolidWorks Simulation and Ansys software, a static load was applied on the pedal and Von Mises stresses and locations with the highest deformation were obtained. After that, a numerical analysis of material fatigue was created and the results for three parameters were obtained. Those parameters are damage, life and load factor. These numerical simulations represented a stress cycle with an alternating stress above the endurance limit and show a measurable permanent damage in few locations.

Izvorni jezik
Hrvatski

Znanstvena područja
Strojarstvo

POVEZANOST RADA