Pregled bibliografske jedinice broj: 1142404
The influence of AC interference on electrochemical impedance spectroscopy measurements on high impedance coatings
The influence of AC interference on electrochemical impedance spectroscopy measurements on high impedance coatings // 10th ISE Satellite Student Regional Symposium on Electrochemistry / Marčinek Saša, Mikić Dajana (ur.).
Zagreb: Hrvatsko društvo kemijskih inženjera i tehnologa (HDKI), 2021. str. 24-24 (predavanje, nije recenziran, sažetak, znanstveni)
CROSBI ID: 1142404 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The influence of AC interference on electrochemical impedance spectroscopy measurements on high impedance coatings
Autori
Šoljić Ines, Šoić Ivana, Martinez Sanja
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
10th ISE Satellite Student Regional Symposium on Electrochemistry
/ Marčinek Saša, Mikić Dajana - Zagreb : Hrvatsko društvo kemijskih inženjera i tehnologa (HDKI), 2021, 24-24
ISBN
978-953-6894-79-6
Skup
10th ISE Satellite Student Regional Symposium on Electrochemistry
Mjesto i datum
Zagreb, Hrvatska, 02.07.2021
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Nije recenziran
Ključne riječi
EIS ; coating ; polyester ; AC interferences
Sažetak
The influence of AC interference on electrochemical impedance spectroscopy (EIS) measurements on industrial coating systems was investigated. EIS is an interesting method as it quantifies coating quality by measuring coating impedance. The study first addresses the accuracy, repeatability and reproducibility of measurements made on calibration foils inside and outside the Faraday cage under various intentional AC interferences. The relative standard deviation (RSD) of the impedance of the foils inside the Faraday cage is less than 0.5%. Outside the Faraday cage, a relationship is established between the signal-to-noise ratio, the RSD of the measurements and the relative measurement error. It was found that for the noise amplitude up to 250 mV, both the RSD and the relative error can be kept below 5 % by increasing the DEIS signal amplitude to 250 mV and taking average of ten repeated measurements.
Izvorni jezik
Engleski
Znanstvena područja
Temeljne tehničke znanosti
POVEZANOST RADA
Ustanove:
Fakultet kemijskog inženjerstva i tehnologije, Zagreb