Pretraga

Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 1140860

Gear Geometry Inspection Based on 3D Optical Scanning: Worm Wheel Case Study

Mašović, Robert; Čular, Ivan; Vučković, Krešimir; Žeželj, Dragan; Breški, Tomislav
Gear Geometry Inspection Based on 3D Optical Scanning: Worm Wheel Case Study // 12th International Conference on Mechanical and Aerospace Engineering (ICMAE) / Agarwal, Ramesh K. (ur.).
Atena, Grčka: Institute of Electrical and Electronics Engineers (IEEE), 2021. str. 262-268 doi:10.1109/ICMAE52228.2021.9522366 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

CROSBI ID: 1140860 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Gear Geometry Inspection Based on 3D Optical Scanning: Worm Wheel Case Study

Autori
Mašović, Robert ; Čular, Ivan ; Vučković, Krešimir ; Žeželj, Dragan ; Breški, Tomislav

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
12th International Conference on Mechanical and Aerospace Engineering (ICMAE) / Agarwal, Ramesh K. - : Institute of Electrical and Electronics Engineers (IEEE), 2021, 262-268

ISBN
978-1-6654-3321-1

Skup
12th International Conference on Mechanical and Aerospace Engineering (ICMAE 2021)

Mjesto i datum
Atena, Grčka, 16.07.2021. - 19.07.2021

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
3D optical scan , gear inspection , deviation , finite element analysis

Sažetak
Optical measurement methods provide fast data acquisition and the ability to evaluate the entire geometry of a scanned component. Capability of a three-dimensional optical scanning for a gear geometry inspection is presented and discussed. Due to its complex geometry and susceptibility to operating problems as a result of inaccurate manufacturing parameters, the inspection is conducted on a worm wheel. Geometrical accuracy of a scanned worm wheel model is evaluated with respect to the referent CAD model. The inspection is carried in accordance with DIN 3974 standard. Pitch deviation, profile deviation, runout deviation, and transmission errors are monitored. Transmission error numerical analysis is carried out. Scanned data is used to generate worm wheel surface model which is mated with the referent worm CAD model. Influence of various mesh sizes is investigated. Additional manufacturing errors which can significantly influence worm wheel operation are pointed out. The proposed method poses an alternative to conventional gear inspection methods which rely on inspection via coordinate measuring machines or specialized gear measuring instruments.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo, Interdisciplinarne tehničke znanosti



POVEZANOST RADA

Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb

Profili:

Avatar Url Tomislav Breški (autor)

Avatar Url Robert Mašović (autor)

Avatar Url Ivan Čular (autor)

Avatar Url Dragan Žeželj (autor)

Avatar Url Krešimir Vučković (autor)

Poveznice na cjeloviti tekst rada:

doi ieeexplore.ieee.org

Citiraj ovu publikaciju:

Mašović, Robert; Čular, Ivan; Vučković, Krešimir; Žeželj, Dragan; Breški, Tomislav
Gear Geometry Inspection Based on 3D Optical Scanning: Worm Wheel Case Study // 12th International Conference on Mechanical and Aerospace Engineering (ICMAE) / Agarwal, Ramesh K. (ur.).
Atena, Grčka: Institute of Electrical and Electronics Engineers (IEEE), 2021. str. 262-268 doi:10.1109/ICMAE52228.2021.9522366 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Mašović, R., Čular, I., Vučković, K., Žeželj, D. & Breški, T. (2021) Gear Geometry Inspection Based on 3D Optical Scanning: Worm Wheel Case Study. U: Agarwal, R. (ur.)12th International Conference on Mechanical and Aerospace Engineering (ICMAE) doi:10.1109/ICMAE52228.2021.9522366.
@article{article, author = {Ma\v{s}ovi\'{c}, Robert and \v{C}ular, Ivan and Vu\v{c}kovi\'{c}, Kre\v{s}imir and \v{Z}e\v{z}elj, Dragan and Bre\v{s}ki, Tomislav}, editor = {Agarwal, R.}, year = {2021}, pages = {262-268}, DOI = {10.1109/ICMAE52228.2021.9522366}, keywords = {3D optical scan , gear inspection , deviation , finite element analysis}, doi = {10.1109/ICMAE52228.2021.9522366}, isbn = {978-1-6654-3321-1}, title = {Gear Geometry Inspection Based on 3D Optical Scanning: Worm Wheel Case Study}, keyword = {3D optical scan , gear inspection , deviation , finite element analysis}, publisher = {Institute of Electrical and Electronics Engineers (IEEE)}, publisherplace = {Atena, Gr\v{c}ka} }
@article{article, author = {Ma\v{s}ovi\'{c}, Robert and \v{C}ular, Ivan and Vu\v{c}kovi\'{c}, Kre\v{s}imir and \v{Z}e\v{z}elj, Dragan and Bre\v{s}ki, Tomislav}, editor = {Agarwal, R.}, year = {2021}, pages = {262-268}, DOI = {10.1109/ICMAE52228.2021.9522366}, keywords = {3D optical scan , gear inspection , deviation , finite element analysis}, doi = {10.1109/ICMAE52228.2021.9522366}, isbn = {978-1-6654-3321-1}, title = {Gear Geometry Inspection Based on 3D Optical Scanning: Worm Wheel Case Study}, keyword = {3D optical scan , gear inspection , deviation , finite element analysis}, publisher = {Institute of Electrical and Electronics Engineers (IEEE)}, publisherplace = {Atena, Gr\v{c}ka} }

Citati:

    Altmetrijski pokazatelji:


    Podijeli:





    Contrast
    Increase Font
    Decrease Font
    Dyslexic Font
    CROSBI koristi kolačiće (cookies) kako bi poboljšao funkcionalnost stranice.