Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 1139656

Influence of molar mass and styrene on thermal stability and phase transitions of methacrylate based polymer additives for lubricating oils


Medić, Mihovil; Rebrović, Lucija; Faraguna, Fabio; Vidović, Elvira; Jukić, Ante
Influence of molar mass and styrene on thermal stability and phase transitions of methacrylate based polymer additives for lubricating oils // Book of abstracts of the 6th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC6) and 15th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2021) / Rotaru, Andrei ; Erceg, Matko (ur.).
Split: SITECH, Rumunjska, 2021. str. 139-139 (poster, međunarodna recenzija, sažetak, znanstveni)


CROSBI ID: 1139656 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Influence of molar mass and styrene on thermal stability and phase transitions of methacrylate based polymer additives for lubricating oils

Autori
Medić, Mihovil ; Rebrović, Lucija ; Faraguna, Fabio ; Vidović, Elvira ; Jukić, Ante

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni

Izvornik
Book of abstracts of the 6th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC6) and 15th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2021) / Rotaru, Andrei ; Erceg, Matko - Split : SITECH, Rumunjska, 2021, 139-139

ISBN
978-606-11-7861-2

Skup
6th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC) ; 15th Mediterranean Conference on Calorimetry and Thermal Analysis (MEDICTA)

Mjesto i datum
Split, Hrvatska, 20.07.2021. - 24.07.2021

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
lubricating oils ; polymer additives ; thermal properties ; DSC ; TGA
(lubricating oils ; polymer additives, thermal properties, DSC, TGA)

Sažetak
Polymers based on alkyl methacrylates are widely used as additives for modifying the rheology of lubricating oils, where they serve as viscosity thickeners, viscosity index improvers and pour point depressants. It was established that methacrylates with medium size lateral alky groups (C10-C14) enhance viscosity index and those with the long chain groups (C16-C18) mostly contribute to the lowering of the pour point of solutions, whereas the methyl group contributes to the stiffness of the polymer chain. Also, polymers for lubricating purpose should have high shear stress stability over broad temperature range as the conditions found in lubricating environment require. Thus, to have multiple functionalities, additives should have high thermal and oxidative stability which can be achieved by addition of styrene comonomer units. [1, 2] Free radical polymerizations of monomers were carried out at 95 °C in mineral base oil using tert-butyl- peroxy-2-etilhexanoate as initiator and n- dodecyl mercaptane as chain transfer agent. There are two groups of polymers containing same comonomers: N, N-dimethylaminoethyl methacrylate (DMAEMA), dodecyl methacrylate (DDMA) and octadecyl methacrylate (ODMA) differentiating in one comonomer: styrene (ST) and methyl methacrylate (MMA). Synthesized polymers of different molar mass and composition were analysed using differential scanning calorimetry to determine phase transitions (glass transition temperature, melting point and crystallization temperature). Also, thermogravimetric analysis was carried out to investigate thermal and oxidative stability.

Izvorni jezik
Engleski

Znanstvena područja
Kemijsko inženjerstvo, Temeljne tehničke znanosti, Interdisciplinarne tehničke znanosti



POVEZANOST RADA


Ustanove:
Fakultet kemijskog inženjerstva i tehnologije, Zagreb

Poveznice na cjeloviti tekst rada:

www.ceec-tac.com

Citiraj ovu publikaciju:

Medić, Mihovil; Rebrović, Lucija; Faraguna, Fabio; Vidović, Elvira; Jukić, Ante
Influence of molar mass and styrene on thermal stability and phase transitions of methacrylate based polymer additives for lubricating oils // Book of abstracts of the 6th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC6) and 15th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2021) / Rotaru, Andrei ; Erceg, Matko (ur.).
Split: SITECH, Rumunjska, 2021. str. 139-139 (poster, međunarodna recenzija, sažetak, znanstveni)
Medić, M., Rebrović, L., Faraguna, F., Vidović, E. & Jukić, A. (2021) Influence of molar mass and styrene on thermal stability and phase transitions of methacrylate based polymer additives for lubricating oils. U: Rotaru, A. & Erceg, M. (ur.)Book of abstracts of the 6th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC6) and 15th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2021).
@article{article, author = {Medi\'{c}, Mihovil and Rebrovi\'{c}, Lucija and Faraguna, Fabio and Vidovi\'{c}, Elvira and Juki\'{c}, Ante}, year = {2021}, pages = {139-139}, keywords = {lubricating oils, polymer additives, thermal properties, DSC, TGA}, isbn = {978-606-11-7861-2}, title = {Influence of molar mass and styrene on thermal stability and phase transitions of methacrylate based polymer additives for lubricating oils}, keyword = {lubricating oils, polymer additives, thermal properties, DSC, TGA}, publisher = {SITECH, Rumunjska}, publisherplace = {Split, Hrvatska} }
@article{article, author = {Medi\'{c}, Mihovil and Rebrovi\'{c}, Lucija and Faraguna, Fabio and Vidovi\'{c}, Elvira and Juki\'{c}, Ante}, year = {2021}, pages = {139-139}, keywords = {lubricating oils, polymer additives, thermal properties, DSC, TGA}, isbn = {978-606-11-7861-2}, title = {Influence of molar mass and styrene on thermal stability and phase transitions of methacrylate based polymer additives for lubricating oils}, keyword = {lubricating oils, polymer additives, thermal properties, DSC, TGA}, publisher = {SITECH, Rumunjska}, publisherplace = {Split, Hrvatska} }




Contrast
Increase Font
Decrease Font
Dyslexic Font