Pregled bibliografske jedinice broj: 1135545
Effect of Copper and Heat Treatment on Microstructure of Austempered Ductile Iron
Effect of Copper and Heat Treatment on Microstructure of Austempered Ductile Iron // Transactions of the Indian Institute of Metals, 74 (2021), 6; 1455-1468 doi:10.1007/s12666-021-02225-6 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 1135545 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Effect of Copper and Heat Treatment on
Microstructure of Austempered Ductile Iron
Autori
Čatipović, Nikša ; Živković, Dražen ; Dadić, Zvonimir ; Ljumović, Petar
Izvornik
Transactions of the Indian Institute of Metals (0972-2815) 74
(2021), 6;
1455-1468
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
Austempered ductile iron ; Austempering parameters ; Copper content ; Microstructure ; Mathematical modelling ;
(Austempered ductile iron ; Austempering parameters ; Copper content ; Microstructure ; Mathematical modelling)
Sažetak
Austempering of ductile iron was described in this paper. All the influential parameters during production of ADI have been clarified. The literature data indicate that each heat treatment parameter has a certain influence on the final microstructure and, therefore, on the mechanical properties of ADI. Effect of alloying elements in ductile iron has been investigated. Based on the current knowledge and austempering heat treatment parameters, a plan of experiments was designed. In this paper, the influence of the most important heat treatment parameters and copper content on the final microstructure of ADI was determined. By varying the copper content, it is possible to influence the volume fraction of retained austenite in ADI. The results of the planned research could serve as a basis for the development of unique mathematical models that would include the influence of each individual parameter of heat treatment and copper content on the microstructure of ADI. The mathematical models thus developed would serve to predict the final mechanical properties depending on the input parameters of the heat treatment and the copper content.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija, Strojarstvo
POVEZANOST RADA
Ustanove:
Fakultet elektrotehnike, strojarstva i brodogradnje, Split
Profili:
Nikša Čatipović
(autor)
Dražen Živković
(autor)
Petar Ljumović
(autor)
Zvonimir Dadić
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI