Pregled bibliografske jedinice broj: 1134858
Dynamic Modelling, Experimental Identification and Computer Simulations of Non-Stationary Vibration in High-Speed Elevators
Dynamic Modelling, Experimental Identification and Computer Simulations of Non-Stationary Vibration in High-Speed Elevators // Strojniški vestnik – Journal of Mechanical Engineering, 67 (2021), 6; 287-301 doi:10.5545/sv-jme.2020.7179 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 1134858 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Dynamic Modelling, Experimental Identification
and Computer Simulations of Non-Stationary
Vibration in High-Speed Elevators
Autori
Đokić, Radomir ; Vladić, Jovan ; Kljajin, Milan ; Jovanović, Vesna ; Marković, Goran ; Karakašić, Mirko
Izvornik
Strojniški vestnik – Journal of Mechanical Engineering (0039-2480) 67
(2021), 6;
287-301
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
high-speed elevators ; dynamic analysis ; a rope with time-varying length ; mechanical characteristics of steel ropes ; longitudinal oscillations ; control program
Sažetak
Modelling the dynamic behaviour of elevators with high lifting velocities (contemporary elevators in building construction and mine elevators) is a complex task and an important step in the design process and creating conditions for safe and reliable exploitation of these machines. Due to high heights and lifting velocities, the standard procedures for dynamic exploitation are not adequate. The study presents the method of forming a dynamic model to analyse nonstationary vibrations of a rope with time-varying length with nonholonomic boundary conditions in the position where the rope is connected with the cabin (cage) and in the upcoming point of its winding onto the pulley (drum). A unique method was applied to identify the basic parameters of the dynamic model (stiffness and damping) based on experimental measures for a concrete elevator. Due to the verification of this procedure, the experiment was conducted on a mine elevator in RTB Bor, Serbia. Using the obtained computer- experimental results, the simulations of the dynamic behaviour of an empty and loaded cage were shown. In addition, the study shows the specific method as the basis for forming a control program that would enable the decrease in vertical vibrations during an elevator starting and braking mode.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Ustanove:
Sveučilište Sjever, Koprivnica
Profili:
Mirko Karakašić
(autor)
Goran Marković
(autor)
Vesna Jovanović
(autor)
Milan Kljajin
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus