Pregled bibliografske jedinice broj: 113368
The influence of excitation current on the root canal length measurement
The influence of excitation current on the root canal length measurement // Proc. of the International Federation for Medical & Biological Engineering, Vol. 3, Part 1 / Hutten, Helmut ; Krosl, Peter (ur.).
Beč: International Federation of Medical and Biological Engineering (IFMBE), 2002. str. 140-141 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 113368 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The influence of excitation current on the root canal length measurement
Autori
Protulipac, Tihomir ; Stare, Zoran
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proc. of the International Federation for Medical & Biological Engineering, Vol. 3, Part 1
/ Hutten, Helmut ; Krosl, Peter - Beč : International Federation of Medical and Biological Engineering (IFMBE), 2002, 140-141
Skup
2nd European Medical and Biological Engineering Conference EMBEC&#8217 ; ; 02
Mjesto i datum
Beč, Austrija, 04.12.2002. - 08.12.2002
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
apex location; current density; endodontics; bioimpedance; electrodes
Sažetak
Root canal length measurement was simulated by placing the tip of the active electrode (Kerr file or Miller-Donalds needle) on the gingiva and measuring the impedance between the active electrode and large area electrode fixed on the lip. The impedance was measured for the series of voltage excitation amplitudes at the frequencies in range 20 Hz&#8211 ; ; 1 MHz. It has been shown that measured values of impedance tend to decline when current density higher than critical one is applied. This matches with the same measurements performed on the electrode/electrolyte interface, but critical values of current density are about 10 times lower for measurement in electrolyte. In the construction of electronic apex locator it is important to ensure that current density is lower than critical one for every needle used.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika