Naslov
Conventional and non-conventional sintering techniques of high purity alumina ceramics

Autori
Ropuš, Ivana ; Ćurković, Lidija ; Mandić, Vilko ; Kerolli Mustafa, Mihone ; Gabelica, Ivana

Izvornik
Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku (1330-3651) 28 (2021), 5; 1526-1531

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
alumina ceramics ; conventional sintering ; hybrid microwave sintering ; shrinkage

Sažetak
The goal of this study is to compare the properties of cold isostatically pressed (CIP) alumina (A2O3) samples sintered by conventional (electrical) and non-conventional (hybrid microwave) techniques. X-ray diffraction was used to determine phase composition of A2O3 samples (raw powder and granules). Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) analyses were used to investigate the thermal behaviour of the Al2O3 powder and granules during the thermal treatment. Compaction of spray dried A2O3 granules into green compact bodies was performed by CIP, followed by sintering of green bodies at 1600 °C in an electrical and hybrid microwave kilns, respectively. Scanning electron microscopy (SEM) was used to analyse morphology of the Al2O3 granules and fracture surface of Al2O3 compacts derived by both sintering techniques. Higher linear shrinkage and densification were obtained for alumina samples sintered in electrical kiln (conventional method), while sintering by faster and more energy efficient hybrid microwave kiln (non-conventional sintering method) yielded alumina samples with finer grain size. Alumina samples sintered by electrical kiln displayed higher relative densities and lower porosities.

Izvorni jezik
Engleski

Znanstvena područja
Kemijsko inženjerstvo, Strojarstvo, Temeljne tehničke znanosti

POVEZANOST RADA