Pregled bibliografske jedinice broj: 1014695
Some dilemmas in energy approach to vibration and stability analysis of pressurized and rotating toroidal shells
Some dilemmas in energy approach to vibration and stability analysis of pressurized and rotating toroidal shells // International journal for engineering modelling, 32 (2019), 1; 59-76 doi:10.31534/engmod.2019.1.ri.01f (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 1014695 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Some dilemmas in energy approach to vibration
and stability analysis of pressurized and
rotating toroidal shells
Autori
Senjanović, Ivo ; Alujević, Neven ; Ćatipović, Ivan ; Čakmak, Damjan ; Vladimir, Nikola ; Lozina, Željan
Izvornik
International journal for engineering modelling (1330-1365) 32
(2019), 1;
59-76
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
toroidal shell ; vibration ; buckling ; energy formulation ; geometric stiffness matrix ; Coriolis mass matrix
Sažetak
In this paper some dilemmas related to the application of the Rayleigh – Ritz method (RRM) in conjunction with the Fourier series for vibration and stability analysis of pressurized and rotating toroidal shells are elucidated. The physical meaning of the strain and kinetic energy terms of different order of displacements in the energy balance equation are explained. Only the second order terms remain in the variation of equation of motion. In the RRM, a symmetric Coriolis mass matrix is obtained as a result of using the energy approach. In FEM, the matrix equation of motion is complex and the Coriolis mass matrix is antisymmetric. It is shown that by transferring the equation of motion from the complex into the real domain, its size is doubled and the total Coriolis matrix becomes symmetric. The influence of using the Green–Lagrange non– linear strains and the engineering strains on vibration and buckling of a toroidal shell is contrasted. It is observed that differences in the dynamic analysis, due to the two different non–linear strain formulations, is quite small. On the contrary, in buckling analysis the engineering strains give considerably higher value of the critical load.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo, Strojarstvo, Zrakoplovstvo, raketna i svemirska tehnika, Temeljne tehničke znanosti
POVEZANOST RADA
Projekti:
GCRC-SOP (Grant No. 2011-0030669)
Ustanove:
Fakultet elektrotehnike, strojarstva i brodogradnje, Split,
Fakultet strojarstva i brodogradnje, Zagreb
Profili:
Nikola Vladimir
(autor)
Ivan Ćatipović
(autor)
Ivo Senjanović
(autor)
Damjan Čakmak
(autor)
Željan Lozina
(autor)
Neven Alujević
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Scopus