Pregled bibliografske jedinice broj: 1005988
COATING INFLUENCE ON ULTRASONIC THICKNESS MEASUREMENT RESULT
COATING INFLUENCE ON ULTRASONIC THICKNESS MEASUREMENT RESULT // Proceedings of 29th DAAAM International Symposium / Katalinić, Branko (ur.).
Zadar: DAAAM International Vienna, 2018. str. 0341-0346 doi:10.2507/29th.daaam.proceedings.049 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 1005988 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
COATING INFLUENCE ON ULTRASONIC THICKNESS MEASUREMENT RESULT
Autori
Mihaljević, Morana ; Cajner, Hrvoje ; Markučič, Damir ; Kožić, Karlo
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of 29th DAAAM International Symposium
/ Katalinić, Branko - Zadar : DAAAM International Vienna, 2018, 0341-0346
Skup
29th DAAAM International Symposium
Mjesto i datum
Zagreb, Hrvatska, 24.10.2018. - 27.10.2018
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
ultrasonic thickness measurement ; measurement uncertainty ; coating influence ; Monte Carlo simulation
Sažetak
In this paper the Monte Carlo Simulation is presented and applied as a method for quantification of the coating influence on ultrasonic thickness measurement (UTM) results. UTM as a Non Destructive Testing (NDT) technique is commonly used for integrity assessment of components and the whole structures. It belongs to a field of measurement activities since the measurement result is shown quantitatively. Generally, a measurement result is complete only when it is followed up by a statement of the associated uncertainty. In order to evaluate the measurement uncertainty of ultrasonic thickness measurements all significant factors and their interactions should be taken into account. One of the influence factor is coating over the base material. In some cases the coating can be removed before the beginning of measurement procedure, but in some cases the measurement should be conducted through the coating. In this paper the coating influence on ultrasonic thickness measurement result was analysed and quantified by measuring the thickness of base material over the coating in repeatability conditions. In order to investigate the coating thickness impact of measurement component, measurements were conducted on prepared test specimen of steel. Extended measurement uncertainty of selected ultrasonic thickness measurement system was estimated.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb