Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 1005360

Analysis of the heat affected zone in plasma jet cutting process of the aluminium alloy EN AW 5083


Peko, Ivan; Ljumović, Petar; Nedić, Bogdan; Dunđer, Marko
Analysis of the heat affected zone in plasma jet cutting process of the aluminium alloy EN AW 5083 // Zaštita materijala, 60 (2019), 2; 174-181 doi:10.5937/zasmat1902174P (međunarodna recenzija, članak, znanstveni)


CROSBI ID: 1005360 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Analysis of the heat affected zone in plasma jet cutting process of the aluminium alloy EN AW 5083

Autori
Peko, Ivan ; Ljumović, Petar ; Nedić, Bogdan ; Dunđer, Marko

Izvornik
Zaštita materijala (0351-9465) 60 (2019), 2; 174-181

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
plasma jet cutting ; heat affected zone ; aluminium ; EN AW 5083 ; hardness ; material structure

Sažetak
Plasma jet cutting process is a well-known nonconventional thermo-electrical manufacturing process that is widely used in metal and shipbuilding industry. It uses the energy of highly ionized gas to cut various types of metal materials. Cutting process is determined by technological parameters whose values define the final cut quality results. Cut quality can be defined considering different characteristics such as: kerf width, bevel angle, surface roughness, dross height and heat affected zone. In this paper, a research on the influence of variable process parameters on the heat affected zone (HAZ) was conducted. An investigated material was aluminium alloy EN AW 5083. HAZ analysis was done by measuring hardness changes on the specimen cross sections and by microscopic observation of the material structure.

Izvorni jezik
Engleski



POVEZANOST RADA


Profili:

Avatar Url Marko Dunđer (autor)

Avatar Url Petar Ljumović (autor)

Avatar Url Ivan Peko (autor)

Poveznice na cjeloviti tekst rada:

doi idk.org.rs

Citiraj ovu publikaciju:

Peko, Ivan; Ljumović, Petar; Nedić, Bogdan; Dunđer, Marko
Analysis of the heat affected zone in plasma jet cutting process of the aluminium alloy EN AW 5083 // Zaštita materijala, 60 (2019), 2; 174-181 doi:10.5937/zasmat1902174P (međunarodna recenzija, članak, znanstveni)
Peko, I., Ljumović, P., Nedić, B. & Dunđer, M. (2019) Analysis of the heat affected zone in plasma jet cutting process of the aluminium alloy EN AW 5083. Zaštita materijala, 60 (2), 174-181 doi:10.5937/zasmat1902174P.
@article{article, author = {Peko, Ivan and Ljumovi\'{c}, Petar and Nedi\'{c}, Bogdan and Dun\djer, Marko}, year = {2019}, pages = {174-181}, DOI = {10.5937/zasmat1902174P}, keywords = {plasma jet cutting, heat affected zone, aluminium, EN AW 5083, hardness, material structure}, journal = {Za\v{s}tita materijala}, doi = {10.5937/zasmat1902174P}, volume = {60}, number = {2}, issn = {0351-9465}, title = {Analysis of the heat affected zone in plasma jet cutting process of the aluminium alloy EN AW 5083}, keyword = {plasma jet cutting, heat affected zone, aluminium, EN AW 5083, hardness, material structure} }
@article{article, author = {Peko, Ivan and Ljumovi\'{c}, Petar and Nedi\'{c}, Bogdan and Dun\djer, Marko}, year = {2019}, pages = {174-181}, DOI = {10.5937/zasmat1902174P}, keywords = {plasma jet cutting, heat affected zone, aluminium, EN AW 5083, hardness, material structure}, journal = {Za\v{s}tita materijala}, doi = {10.5937/zasmat1902174P}, volume = {60}, number = {2}, issn = {0351-9465}, title = {Analysis of the heat affected zone in plasma jet cutting process of the aluminium alloy EN AW 5083}, keyword = {plasma jet cutting, heat affected zone, aluminium, EN AW 5083, hardness, material structure} }

Citati:





    Contrast
    Increase Font
    Decrease Font
    Dyslexic Font