CROSBI Profil: Jure Krolo (32965)

Jure Krolo

CROSBI Profil: 32965

MZO Matični broj znanstvenika: 350315

ORCID: 0000-0002-3204-0344

WoS Researcher ID: D-8725-2017

Za prikaz radova s mogućnošću filtriranja te izvoza podataka kliknite OVDJE

Izobrazba

Nema dodanih izobrazbi.

Nagrade i priznanja

Nema dodanih nagrada i priznanja.

Aktivnosti

Nema dodanih aktivnosti.

Radovi

Svi radovi

1.

Krolo, Jure; Lela, Branimir; Grgić, Karla; Jozić, Sonja
Production of Closed-Cell Foams out of Aluminum Chip Waste: Mathematical Modeling and Optimization // Metals, 12 (2022), 6; 933, 17 doi:10.3390/met12060933 (međunarodna recenzija, članak, znanstveni)
doi doi.org
2.

Vrsalovic, Ladislav; Gudić, Senka; Krolo, Jure; Lela, Branimir; Jozić, Sonja; Bajić, Dražen; Grgić, Karla
Corrosion behavior of Al foams in 0.5 M NaCl solution // 22th International Conference on Materials, Tribology and Recycling - MATRIB 2022 / Bušić, Matija ; Leder Horina, Jasna ; Tropša, Vlado (ur.).
Zagreb: HDMT – Hrvatsko Društvo za Materijale i Tribologiju, 2022. str. 431-440 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
3.

Grgić, Karla; Lela, Branimir; Jozić, Sonja; Krolo, Jure
Aluminium foams made of various aluminium alloys scrap and various foaming agents // Proceeding of International conference “Mechanical Technologies and Structural Materials” / Jozić, Sonja ; Lela, Branimir ; Gjeldum, Nikola (ur.).
Split, 2022. str. 37-42 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Pristup cjelovitom tekstu rada
4.

Krolo, Jure; Lela, Branimir; Biba, Nikolay; Šakota, Domagoj
Analysis of the tube hydroforming by numerical simulation and Response Surface Methodology // Proceedings of International conference “Mechanical Technologies and Structural Materials” / Jozić, Sonja ; Lela, Branimir ; Gjeldum, Nikola (ur.).
Split, Hrvatska, 2022. str. 81-86 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Pristup cjelovitom tekstu rada
5.

Dumanić, Ivana; Jozić, Sonja; Bajić, Dražen; Krolo, Jure
Optimization of Semi-solid High- Pressure Die Casting Process by Computer Simulation, Taguchi Method and Grey Relational Analysis // International Journal of Metalcasting, 15 (2021), 1; 108-118 doi:10.1007/s40962-020-00422-5 (međunarodna recenzija, članak, znanstveni)
doi doi.org link.springer.com
6.

Krolo, Jure; Dumanić, Ivana; Jozić, Sonja; Lela, Branimir
Influence of semi-solid metal processing and artificial aging on microstructure and hardness of the AlSi9Cu3(Fe) // Proceeding book of the 19th International Foundryman Conference entitled: Humans - Valuable Resource for Foundry Industry Development / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Brajčinović, Sandra (ur.).
Sisak: Faculty of Metallurgy, 2021. str. 186-193 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
7.

Lela, Branimir; Jozić, Sonja; Krolo, Jure; Dumanić, Ivana; Grgić, Karla
Production of Open-Cell Foams out of Aluminium Chips // Proceedings of 8th Annual International Conference on Technology & Engineering / Papanikos, Gregory T. (ur.).
Athens, Greece, 2021. 7, 13 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
8.

Bašić, Andrej; Peko, Ivan; Krolo, Jure; Bagavac, Petra
Fuzzy logic modeling of ultimate tensile strength and cost in fused deposition modeling process of additive manufacturing // Proceedings of 10th International conference ''Mechanical technologies and structural materials'' / Jozić, Sonja ; Lela, Branimir ; Gjeldum, Nikola (ur.).
Split: CROATIAN SOCIETY FOR MECHANICAL TECHNOLOGIES, Croatia, 2021. str. 1-10 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Pristup cjelovitom tekstu rada
9.

Krolo, Jure; Dadić, Zvonimir; Čatipović, Nikša; Doždor, Tin
Aluminium waste reduction in automotive composite weather strip seal manufacturing // Proceeding of International conference “Mechanical Technologies and Structural Materials”
Split, Hrvatska, 2021. str. 75-79 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), stručni)
10.

Lela, Branimir; Krolo, Jure; Grgić, Karla; Jozić, Sonja; Dumanić, Ivana
Production of closed cell foams from the aluminium chip waste // Proceedings of International conference “Mechanical Technologies and Structural Materials”
Split, 2021. str. 95-100 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Pristup cjelovitom tekstu rada
11.

Krolo, Jure; Lela, Branimir; Ević, Joze; Biba, Nikolay
3D finite element analysis of ECAP processing routes influence on strain homogeneity // Proceedings 30th Anniversary International Conference on Metallurgy and Materials
Keltickova 62, 710 00 Ostrava, Czech Republic, EU: TANGER Ltd., 2021. str. 235-240 doi:10.37904/metal.2021.4116 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
doi www.confer.cz
12.

Lela, Branimir; Jozić, Sonja; Krolo, Jure; Dumanić, Ivana; Grgić, Karla
Production of Open Cell Foams Out of Aluminium Chips // Athens journal of technology & engineering, 8 (2021), 4; 299-310 doi:10.30958/ajte.8-4-2 (međunarodna recenzija, članak, znanstveni)
doi www.athensjournals.gr
13.

Krolo, Jure; Lela, Branimir
Alternative methods of aluminum alloys recycling in solid and semisolid state // 13th International Conference Structural Materials 2021
Bratislava, Slovačka, 2021. str. 1-1 (pozvano predavanje, međunarodna recenzija, sažetak, znanstveni)
14.

Dumanić, Ivana; Krolo, Jure; Lela, Branimir; Jozić, Sonja
Thermomechanical treatment of A380 aluminum alloy for globular thixo feedstock // Materialwissenschaft und Werkstofftechnik, 51 (2020), 1047-1057 doi:10.1002/mawe.202000076 (međunarodna recenzija, članak, znanstveni)
doi onlinelibrary.wiley.com
15.

Krolo, Jure; Gudić, Senka; Vrsalović, Ladislav; Lela, Branimir; Dadić, Zvonimir
Fatigue and corrosion behavior of solid state recycled aluminum alloy EN AW 6082 // Journal of materials engineering and performance, 29 (2020), 4310-4321 doi:10.1007/s11665-020-04975-8 (međunarodna recenzija, članak, znanstveni)
doi link.springer.com
16.

Krolo, Jure; Lela, Branimir; Švagelj, Zrinka; Jozić, Sonja
Adaptive neuro-fuzzy and regression models for predicting microhardness and electrical conductivity of solid-state recycled EN AW 6082 // International journal of advanced manufacturing technology, 100 (2019), 9/12; 2981-2993 doi:10.1007/s00170-018-2893-x (međunarodna recenzija, članak, znanstveni)
doi link.springer.com doi.org
17.

Krolo, Jure; Lela, Branimir; Ljumović, Petar; Bagavac, Petra
Enhanced Mechanical Properties of Aluminium Alloy EN AW 6082 Recycled without Remelting // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 26 (2019), 5; 1253-1259 (međunarodna recenzija, članak, znanstveni)
18.

Lela, Branimir; Krolo, Jure; Mirić, Tea
Mathematical modeling of an experimental- analytical method for friction coefficient determination in deep drawing // Materialwissenschaft und Werkstofftechnik, 50 (2019), 372-381 doi:10.1002/mawe.201800018 (međunarodna recenzija, članak, znanstveni)
doi
19.

Krolo, Jure; Lela, Branimir; Dumanić, Ivana; Kozina, Franjo
Statistical Analysis of the Combined ECAP and Heat Treatment for Recycling Aluminum Chips Without Remelting // Metals, 9 (2019), 6; 660, 14 doi:10.3390/met9060660 (međunarodna recenzija, članak, znanstveni)
doi www.mdpi.com
20.

Dumanić, Ivana; Krolo, Jure; Jozić, Sonja; Lela, Branimir; Bajić, Dražen; Ljumović, Petar
INFLUENCE OF THE PROCESSING ROUTE ON THE MICROSTRUCTURE FORMATION AT SEMI-SOLID TEMPERATURES FOR ALUMINUM ALLOY A380 // CONFERENCE PROCEEDINGS of the 20th International Conference on Materials / Šolić, Sanja ; Schauperl, Zdravko ; Pugar, Daniel (ur.).
Ivana Lučića 1, 10 000 Zagreb, Croatia: HDMT – Hrvatsko Društvo za Materijale i Tribologiju, 2019. str. 137-144 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Pristup cjelovitom tekstu rada
21.

Jozić, Sonja; Bajić, Dražen; Krolo, Jure; Perić, Tomislav
Die for Equal Channel Angular Pressing (ECAP) process: Design and Manufacturing // Mechanical Technologies and Structural Material MTSM2019 / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Croatian Society for Mechanical Technologies, 2019. str. 97-102 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni)
22.

Krolo, Jure; Dumanić, Ivana; Jozić, Sonja; Lela, Branimir
Microstructure of the extruded aluminium AlSi9Cu3(Fe) machining chips reheated in the semisolid state // "Mechanical Technologies and Structural Materials 2019” Conference Proceedings / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Hrvatsko društvo za strojarske tehnologije, 2019. str. 109-114 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Pristup cjelovitom tekstu rada
23.

Čatipović, Nikša; Živković, Dražen; Dadić, Zvonimir; Krolo, Jure
Influence of austempering temperature and salt bath agitation on microstructure and mechanical properties of austempered ductile iron // Kovové materiály, 56 (2018), 3; 137-144 doi:10.4149/km_2018_3_137 (međunarodna recenzija, članak, znanstveni)
doi
24.

Krolo, Jure; Lela, Branimir; Kojundžić, Domagoj; Šerić, Jelena
Compressive flow stress and hardness determination for composites based on aluminum waste // Mechanical Technologies and Structural Materials 2018, Conference Proceedings / Jozić, Sonja ; Gjeldum, Nikola (ur.).
Split : Hrvatsko društvo za strojarske tehnologije, 2018, 2018. str. 111-117 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
25.

Lela, Branimir; Krolo, Jure
Recycling of EN AW 2011 Aluminum Chips without Remelting // Encyclopedia of Aluminum and Its Alloys / Totten, G.E. ; Tiryakioglu, M ; Kessler, O. (ur.).
6000 Broken Sound Parkway NW, Suite 300: Taylor & Francis Group, 2018. str. 2361-2369 doi:10.1201/9781351045636-140000244
doi
26.

Lela, Branimir; Krolo, Jure
An experimental-analytical method for determination of friction factor in deep drawing // Computer integrated manufacturing and high speed machining / E. Abele, T. Udiljak, D. Ciglar (ur.).
Zagreb, 2017. str. 181-187 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
27.

Peko, Ivan; Krolo, Jure; Bagavac, Petra; Đurić, Stefan; Kostić, Nikola; Bašić, Andrej
Modeling and Optimization of Tensile Strength of ABS Parts Manufactured by the Fused Deposition Modeling Process // Proceedings of International conference “Mechanical Technologies and Structural Materials” / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Croatian Society for Mechanical Technologies, 2017. str. 103-110 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Pristup cjelovitom tekstu rada
28.

Krolo, Jure; Lela, Branimir; Ljumović, Petar
Electrical conductivity and mechanical properties of the solid state recycled EN AW 6082 alloy // “Mechanical Technologies and Structural Materials 2017” Conference Proceedings / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Hrvatsko društvo za strojarske tehnologije, 2017. str. 71-76 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Pristup cjelovitom tekstu rada
29.

Lela, Branimir; Duplančić, Igor; Krolo, Jure
Influence of Billet Processing on Extruded Section Properties // Proceedings of Eleventh International Aluminum Extrusion Technology
Chicago, USA, 2016. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
30.

Krolo, Jure; Lela, Branimir; Vuleta, Rafaela
Preliminary study of severe plastic deformation tool for production of solid state recycled materials // Proceedings of 6th International Conference Mechanical Technologies and Structural Materials / Jozić, Sonja ; Lela, Branimir (ur.).
Split, 2016. str. 79-84 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
31.

Lela, Branimir; Krolo, Jure; Jozić, Sonja
Mathematical modeling of solid-state recycling of aluminum chips // International journal of advanced manufacturing technology, 87 (2016), 1; 1125-1133 doi:10.1007/s00170-016-8569-5 (međunarodna recenzija, članak, znanstveni)
doi link.springer.com
32.

Lela, Branimir; Krolo, Jure; Dragičević, Mario
SOLID-STATE RECYCLING OF EN AW 2011 ALUMINIUM CHIPS // Proceedings of 5th International Conference Mechanical Technologies and Structural Materials 2015 / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Croatian society for mechanical technologies, 2015. str. 101-106 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Mentorstva

Trenutno nema povezanih zapisa s profilom.

Prijevodi

Trenutno nema povezanih zapisa s profilom.

Uredništva knjiga i zbornika

Trenutno nema povezanih zapisa s profilom.

Koautori

Svi radovi

Branimir Lela

Sonja Jozić

Ivana Dumanić

Karla Grgić

Dražen Bajić

Petar Ljumović

Petra Bagavac

Zvonimir Dadić

Andrej Bašić

Senka Gudić

Ladislav Vrsalović

Nikša Čatipović

Ivan Peko

Zrinka Švagelj

Dražen Živković

Franjo Kozina

Igor Duplančić

Domagoj Kojundžić