Pregled po znanstvenom području: Zrakoplovstvo, raketna i svemirska tehnika (MB: 2.14)
Pronađeno 765 radova
-
1.Filjar, RenatoResilient GNSS positioning performance: Is the problem solved? // GSA Raw GNSS Measurements Task Force Workshop
Prag, Češka (virtualno), 2020. doi:10.13140/RG.2.2.18367.33447 (pozvano predavanje, međunarodna recenzija, pp prezentacija, znanstveni) -
2.Tukarić, Ivan; Stepanić, JosipConcept of Modular, Self-Supporting Cable for Powering the Hovering Unmanned Aerial Vehicle // Interdisciplinary description of complex systems, 18 (2020), 2-A; 166-174 doi:10.7906/indecs.18.2.7 (međunarodna recenzija, članak, znanstveni)
-
3.Senjanović, Ivo; Čakmak, Damjan; Alujević, Neven; Ćatipović, Ivan; Vladimir, NikolaRing buckling analysis based on the toroidal shell theory // Transactions of FAMENA, 44 (2020), 2; 1-12 doi:10.21278/TOF.44201 (međunarodna recenzija, članak, znanstveni)
-
4.Andraši, Petar; Novak, Doris; Ratković, AntonioOperational Aspects of Vertical Navigation during the Approach Phase of Flight: CDA vs. Conventional Step-Down Approach // Tehnički vjesnik – Technical Gazette, 27 (2020), 2; 346-352 doi:10.17559/TV-20170125145236 (međunarodna recenzija, članak, znanstveni)
-
5.Cazin, Damir; Braut, Sanjin; Božić, Željko; Žigulić, RobertoLow cycle fatigue life prediction of the demining tiller tool // Engineering failure analysis, 111 (2020), 104457, 14 doi:10.1016/j.engfailanal.2020.104457 (međunarodna recenzija, članak, znanstveni)
-
6.Trzun, Zvonko; Andrić, Marijan; Vrdoljak, MilanUsing a 3D Model to Asses Projectile's Impact Points Deviation Due to Manufacturing Errors // INTELLIGENT MANUFACTURING AND AUTOMATION. INTERNATIONAL DAAAM SYMPOSIUM. 30TH 2019. (2 VOLS) / Katalinic, Branko (ur.).
Vienna: Danube Adria Association for Automation and Manufacturing ( DAAAM ), 2020. str. 791-799 doi:10.2507/30th.daaam.proceedings.110 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
7.5th Annual FAMENA PhD Workshop and 2nd joint Conference of Postgraduate Students DrLMZ; Book of Abstracts, Zagreb: Faculty of Mechanical Engineering and Naval Architecture ; Faculty of Metallurgy, 2019 (zbornik)
-
8.Cazin, Damir; Braut, Sanjin; Božić, Željko; Žigulić, RobertoElastic plastic transient mechanical analysis and LCF assesment of the demining tool tiller // Book of Abstracts, / Božić, Željko (ur.).
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. 162, 2 (predavanje, recenziran, prošireni sažetak, znanstveni) -
9.Pustaić, Dragan; Lovrenić-Jugović, MartinaMore accurate mathematical description in the assessment of plastic zone magnitude around the crack tip // Procedia Structural Integrity, 23 (2019), 27-32 doi:10.1016/j.prostr.2020.01.058 (međunarodna recenzija, članak, znanstveni)
-
10.Senjanović, Ivo; Alujević, Neven; Ćatipović, Ivan; Čakmak, Damjan; Vladimir, Nikola; Cho, Dae-SeungNatural vibration analysis of pressurised and rotating toroidal shell segment by Rayleigh-Ritz method // International journal for engineering modelling, 32 (2019), 2-4; 57-81 doi:10.31534/engmod.2019.2-4.ri.01f (međunarodna recenzija, članak, znanstveni)
-
11.Kotarski, Denis; Brozović, Marijan; Šimunić, NikolaKonstruiranje i izvedba eksperimentalnog postava za analizu parametara pogonskog podsustava multirotora // Zbornik Veleučilišta u Karlovcu, 5 (2019), 1; 45-55 (domaća recenzija, prethodno priopćenje, znanstveni)
-
12.Senjanović, Ivo; Alujević, Neven; Ćatipović, Ivan; Čakmak, Damjan; Vladimir, NikolaSemi-analytical methods for vibration and stability analysis of pressurized and rotating toroidal shells based on the energy approach // Rad Hrvatske akademije znanosti i umjetnosti. Tehničke znanosti., 541 (2019), 20; 1-98 doi:10.21857/y26kec30j9 (domaća recenzija, članak, znanstveni)
-
13.Franić, ZdenkoPčele Astronauti // Hrvatska pčela, 138 (2019), 12; 381-382 (članak, ostalo)
-
14.Filić, Mia; Filjar, RenatoA Considerable Level of Correlation Between SID- Monitoring Time Series and GPS-Derived TEC Observations Taken During Development of a Massive Ionospheric Storm // Radio Science Bulletin, 2019 (2019), 370; 27-33 (međunarodna recenzija, članak, znanstveni)
-
15.Ivić, Stefan; Andrejčuk, Aleksandr; Družeta, SinišaAutonomous control for multi-agent non-uniform spraying // Applied Soft Computing, 80 (2019), 742-760 doi:10.1016/j.asoc.2019.05.001 (međunarodna recenzija, članak, znanstveni)
-
16.Cerinski, Damijan; Vujanović, Milan; Petranović, Zvonimir; Baleta, Jakov; Samec, Niko; Hriberšek, MatjažInfluence of Fuel Injection Configuration on NO Formation inside a Jet Engine Combustion Chamber // Digital Proceedings of 14th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko et al. (ur.).
Zagreb: Faculty of Mechanical Engineering and Naval Architecture, 2019. 0469, 17 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
17.Filjar, Renato; Jukić, OliverSelf-adaptive GNSS position estimation process improves mitigation of GNSS ionospheric effects // International Colloquium on Equatorial and Low Latitude Ionosphere
Sveučilište u Lagosu, Akoka, Nigerija, 2019. (plenarno, međunarodna recenzija, ostalo, znanstveni) -
18.Pugar, Daniel; Haramina, Tatjana; Jagar, MatijaPreparation and mechanical properties of a self-healing thermoplastic resin reinforced with carbon fibres // Frontiers in polymer science 2019
Budimpešta, Mađarska, 2019. str. 1-1 (poster, međunarodna recenzija, sažetak, ostalo) -
19.Katić, MiljenkaProračun performansi zrakoplova Diamond Katana DV20 2019., diplomski rad, diplomski, Fakultet prometnih znanosti, Zagreb
-
20.Kurtela, Marin; Alar, Vesna; Šimunović, Vinko; Jakovljević, SuzanaDeposition of Cerium(III)-chloride heptahydrate on Aluminium Alloy 2024-T3 in Chloride Solution // EUROCORR 2019 ; New times, new materials new corrosion challenges/Seville, Spain
Seville: Sociedad Española des Materiales (SOCIEMAT), Eurocorr 2019, 2019. str. 1-1 (poster, međunarodna recenzija, sažetak, znanstveni) -
21.Filić, Mia; Filjar, RenatoGNSS Positioning Error Change-point Detection in GNSS Positioning Performance Modelling // Transnav - International Journal on Marine Navigation and Safety of Sea Transportation, 13 (2019), 3; 575-579 doi:10.12716/1001.13.03.12 (međunarodna recenzija, članak, znanstveni)
-
22.Senjanović, Ivo; Alujević, Neven; Ćatipović, Ivan; Čakmak, Damjan; Vladimir, Nikola; Lozina, ŽeljanSome dilemmas in energy approach to vibration and stability analysis of pressurized and rotating toroidal shells // International journal for engineering modelling, 32 (2019), 1; 59-76 doi:10.31534/engmod.2019.1.ri.01f (međunarodna recenzija, članak, znanstveni)
-
23.Pustaić, DraganRelaksacija momenta savijanja u poprečnom presjeku prizmatičnoga štapa // Zbornik radova Devetoga susreta Hrvatskoga društva za mehaniku - HDM-a / Skozrit, Ivica ; Tonković, Zdenko ; Karšaj, Igor ; Jarak, Tomislav ; Lesičar, Tomislav (ur.).
Zagreb: Hrvatsko društvo za mehaniku - HDM, 2019. str. 273-280 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni) -
24.Pustaić, Dragan; Lovrenić-Jugović, MartinaMathematical Approach of Crack Tip Plasticity // ABSTRACT BOOKLET ; Materials Structure & Micromechanics of Fracture ; MSMF9 / Šandera, Pavel (ur.).
Brno: VUTIUM Brno, Antoninska 1, Brno University of Technology, 2019. str. 162-162 (poster, međunarodna recenzija, prošireni sažetak, znanstveni) -
25.Filić, Mia; Filjar, RenatoGeneralised Model of Space Weather–GNSS Positioning Performance Coupling // Workshop on Ionospheric Forecasting for GNSS Operations in Developing Countries: Findings and Challenges
Trst, Italija, 2019. (pozvano predavanje, međunarodna recenzija, ostalo, znanstveni)