Pregled po projektu: 0152011

1.

Cebalo, Roko; Stoić, Antun

Optimization of the roughness of the grinded surface by tool dressing with the diamond roll // Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić B.&Kljajin M. (ur.).
Slavonski Brod: DAAAM International &Mechanical Engineering faculty Slavonski Br, 2002. str. 155-160 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2.

Raos, Pero; Stoić, Antun; Kopač, Janez

Identification of cutting conditions in turning by noise recording // Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić B. & Kljajin M. (ur.).
Slavonski Brod: DAAAM International & Mech. eng. Faculty Slav. Brod, 2002. str. 527-532 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

3.

Stoić, Antun

Obradivost tvrdih materijala visokobrzinskim tokarenjem, 2002., doktorska disertacija, Fakultet strojarstva i brodogradnje, Zagreb

4.

Marušić, Vlatko; Vitez, Ivan; Stoić, Antun

Usporedba otpornosti trošenju po dubini sloja cementiranog i površinski zakaljenog čelika // Proceedings of the 7. Savjetovanje o materijalima, tehnologijama, trenju i trošenju / Ćurković, L. ; Grilec K. (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju, 2002. str. 119-123 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), pregledni)

5.

Kopač, Janez; Stoić, Antun; Šali, Samo; Samardžić, Ivan

The relation between the sound pressure and tool vibrations during the turning process // Proceedings of the 8th International Conference on production engineering / Cebalo R., Schulz H. (ur.).
Zagreb: Croatian association of Production Engineering, 2002. str. I 081- I 091 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

6.

Hnatko, Emil; Majdandžić, Niko; Ergić, Todor; Stoić, Antun; Šarić, Tomislav; Jozić, Marko; Tadijanović, Adam

Application of the milling machine vibration signal for cutter condition monitoring // Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, B ; Kljajin, Milan (ur.).
Slavonski Brod: DAAAM International Vienna ; Mechanical Engineering Faculty S.B., 2002. str. 483-488 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

7.

Samardžić, Ivan; Kolumbić, Zvonimir; Baotić, Marko

Doprinos primjeni praškom punjenih žica za zavarivanje MAG postupkom // Tehnički vijesnik, 8 (2002), 3, 4; 23-37 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

8.

Siewert, Thomas; Samardžić, Ivan; Klarić, Štefanija

Application of on-line weld monitoring system // Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, Branko ; Kljajin, Milan (ur.).
Slavonski Brod: DAAAM International, Viena, 2002. str. 227-232 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

9.

Galić, Drago; Samardžić, Ivan; Klarić, Štefanija

Propan-butan pressure vessels production process improvement // CIM 2002 Computer Integrated Manufacturing and High Speed Machining / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Croatian Association of Production Engineering, 2002. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni)

10.

Samardžić, Ivan; Dunđer, Marko

Contribution to weldability investigation of steel TStE 420 on welding thermal cycle simulator // 8th International Scientific Conference on Production Engineering "Computer Integrated Manufacturing and High Speed Machining" (CIM 2002) : proceedings / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Croation Association of Production Engineering, 2002. str. V-065 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

11.

Stoić, Antun; Cukor, Goran

Optimisation Strategy for Laser Beam Cutting // Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium "Intelligent Manufacturing & Automation: Learning From Nature" / Katalinic, Branko (ur.).
Vienna: DAAAM International, 2002. str. 537-538 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

12.

Maglić, Leon

Difficulties during implementation of Quality management systems according to requirements of ISO 9001:2000 // Proceedings of the 8th International scientific conference on production engineering CIM 2002 / Cebalo, R. ; Schulz, H. (ur.).
Zagreb: Croatian association of Production Engineering, 2002. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

13.

Cukor, Goran; Stoić, Antun

A Probabilistic Surface Roughness Model in Laser Cutting Optimisation // Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium "Intelligent Manufacturing & Automation: Learning From Nature" / Katalinic, Branko (ur.).
Vienna: DAAAM International, 2002. str. 115-116 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

14.

Bukvić, Siniša

Unapređenje sustava za nadzor parametara elektrolučnog zavarivaja, 2002., diplomski rad, Strojarski fakultet Slavonski Brod, Slavonski Brod

15.

Ozanjak, Ivica

Zavarljivost vatrootpornih čelika koji se koriste u kotlogradnji, 2002., diplomski rad, Strojarski fakultet Slavonski Brod, Slavonski Brod

16.

Raos, Pero; Matejiček, Franjo; Lucić, Mirjana

Experimental investigation on mechanical characteristics of adhesively bonded single-lap joints // Proceedings of the 1st DAAAM International Conference, Advanced Technologies for Developing Countries, ATDC'02, / Katalinić, B. ; Kljajin, M. (ur.).
Slavonski Brod: DAAAM International & Mech. eng. Faculty Slav. Brod, 2002. str. 517-520 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

17.

Krumes, Dragomir; Kolumbić, Zvonimir; Vitez, Ivan; Aračić, Stjepan

Influence of the boron phases on the materials ductility // Proceedings 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, Branko ; Kljajin, Milan (ur.).
Slavonski Brod: Strojarski fakultet Slavonski Brod, 2002. str. 211-216 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

18.

Cebalo, Roko; Stoić, Antun

Optimisation of the roughness of the ground surface by diamond roller dressing // Tehnički vjesnik - Znanstveno stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 9 (2003), 3, 4; 3-8 (međunarodna recenzija, članak, znanstveni)

19.

Cebalo, Roko; Stoić, Antun; Bajić, Dražen

Optimization of ground surface roughness by tool dresing with the pressing roller // CIM 2003 Computer Integrated Manufacturing and High Speed Machining / Cebalo R. &Schulz H. (ur.).
Zagreb: Croatian Association of Production Engineering, 2003. str. I 011- I 019 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

20.

Cebalo, Roko; Stoić, Antun; Jurjević, Mate

Benefits and limitations of the coolant application for machining // CIM 2003 Computer Integrated Manufacturing and High Speed Machining / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Croatian Association of Production Engineering, 2003. (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

21.

Cebalo, Roko; Bajić, Dražen; Stoić, Antun

OPTIMIZATION OF AN AXIAL HYDROSTATIC BEARING WORK CONDITION // CIM 2003 Computer Integrated Manufacturing and High Speed Machining / Cebalo R & Schulz H. (ur.).
Zagreb: Croatian Association of Production Engineering, 2003. str. II001-II011 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

22.

Vitez, Ivan; Krumes, Dragomir; Kolumbić, Zvonimir

The popular tools for achieving business excellence // Proceedings 6th International Research/Expert Conference: Trends in the development of machinery and associated technology TMT 2002 / Brdarević, Safet ; Ekinović, Sabahudin ; Compamys Pascual, Ramon ; Vivancos Calvet, Joan (ur.).
Neum, BiH: Faculty of Mechanical Engineering in Zenica, BiH, 2002. str. 607-610 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), pregledni)

23.

Samardžić, Ivan; Dunđer, Marko; Konjatić, Pejo

Cost effective design in welded constructions production // 9th International Scientific Conference on Production Engineering "Computer Integrated Manufacturing and High Speed Machining" (CIM 2003) : proceedings / Cebalo, Roko ; Shulz Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva, 2003. str. V-023 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni)

24.

Dunđer, Marko; Samardžić, Ivan

Approach to arc fusion welding main parameters optimization // 9th International Scientific Conference on Production Engineering "Computer Integrated Manufacturing and High Speed Machining" (CIM 2003) : proceedings / Cebalo, Roko ; Shulz Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva, 2003. str. V-011 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni)

25.

Galić, Drago; Samardžić, Ivan; Klarić, Štefanija

Activities on propane-butane pressure vessels quality and reliability assurance // CIM 2003 Computer Integrated Manufacturing and High Speed Machining / Cebalo, Roko ; Shulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva, 2003. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni)