Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Exergy analysis of an air conditioning process (CROSBI ID 675236)

Prilog sa skupa u zborniku | sažetak izlaganja sa skupa | međunarodna recenzija

Đuranović, Matej ; Rauch, Martina ; Živić, Marija ; Galović, Antun Exergy analysis of an air conditioning process // Book of Abstracts Interklima 2019. 2019. str. 1-11

Podaci o odgovornosti

Đuranović, Matej ; Rauch, Martina ; Živić, Marija ; Galović, Antun

engleski

Exergy analysis of an air conditioning process

The exergy analysis of an air conditioning process in wintertime is presented in this paper. This process consists of mixing outdoor air with conditioned air, heating, humidifying, and reheating the air mixture. The air is heated in the heat exchangers by warm water at a temperature of 80/60 °C and humidified by spraying water at a temperature of 12 °C. The ratio of the mass flow rates of outdoor and conditioned air is varied, and it is upon this variable that the exergy analysis is performed. It is shown that the heat transfer rate in the heat exchangers is the smallest at the ratio of mass flow rates of outdoor and conditioned air g1 = 0, 45. The greatest exergy destruction is apparent on the air heaters, and the maximum exergy efficiency of the whole process is 0, 71 is achieved at the ratio g1 = 0, 45. According to the exergy criterion, this air conditioning is a relatively efficient process.

Air conditioning ; exergy destruction ; exergy efficiency

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

1-11.

2019.

objavljeno

Podaci o matičnoj publikaciji

Book of Abstracts Interklima 2019

Podaci o skupu

25th international conference Interklima 2019 14th conference on thermography

predavanje

11.04.2019-12.04.2019

Zagreb, Hrvatska

Povezanost rada

Strojarstvo