Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

The influence of film cooling flow over turbine blades from different shaped holes (CROSBI ID 675189)

Prilog sa skupa u zborniku | izvorni znanstveni rad

Cerinski, Damijan ; Baleta, Jakov ; Wang, Jin ; Wang, Xuebin The influence of film cooling flow over turbine blades from different shaped holes // Proceedings of the European Combustion Meeting 2019 / Costa, Mário ; Pereira, Sandrina (ur.). Lisabon: Instituto Superior Técnico, 2019

Podaci o odgovornosti

Cerinski, Damijan ; Baleta, Jakov ; Wang, Jin ; Wang, Xuebin

engleski

The influence of film cooling flow over turbine blades from different shaped holes

The influence of different shaped holes on the film cooling performance of gas turbine blades was numerically investigated. The hot stream of exhaust gasses from the combustion chamber enters the turbine section of gas turbine engines at high velocity and temperature. The combustion efficiency highly depends on the temperature, but currently used turbine blades materials are not capable to withstand such conditions, therefore utilising the film cooling system is necessary. In this work, CFD simulations were performed to describe the interaction between the hot stream gas from the combustion chamber and the coolant jet from a shaped hole. The computational domain consisted of a hot gas channel and a cooling shaped hole. The validation case with the cylindrical hole was compared to the experimental results and results from LES simulations available in the literature. Temperature distributions were analysed and compared to the case with a cylindrical hole to investigate the influence of different shaped holes on cooling performance. The results showed the possibility of improving the film cooling performance through different design of cooling holes which allows the increase of the temperature in the combustion chamber, and consequently overall combustion efficiency.

CFD ; turbine blades ; film cooling

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

Paper_S2_R1_71

2019.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of the European Combustion Meeting 2019

Costa, Mário ; Pereira, Sandrina

Lisabon: Instituto Superior Técnico

Podaci o skupu

9th European Combustion Meeting (ECM 2019)

poster

14.04.2019-17.04.2019

Lisabon, Portugal

Povezanost rada

Metalurgija, Strojarstvo, Zrakoplovstvo, raketna i svemirska tehnika