Napredna pretraga

Pregled bibliografske jedinice broj: 996443

Influence of blasting on mechanical properties of steel sheet


Buršak, M.; Mamuzić, Ilija; Mihalikova, M.
Influence of blasting on mechanical properties of steel sheet // Materials and Metallurgy, Summaries of Lectures / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2004. str. 214-214 (poster, međunarodna recenzija, sažetak, znanstveni)


Naslov
Influence of blasting on mechanical properties of steel sheet

Autori
Buršak, M. ; Mamuzić, Ilija ; Mihalikova, M.

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni

Izvornik
Materials and Metallurgy, Summaries of Lectures / Mamuzić, Ilija - Zagreb : Hrvatsko metalurško društvo, 2004, 214-214

Skup
6. Međunarodni simpozij Hrvatskog metalurškog društva, SHMD 2004, Materijali i metalurgija

Mjesto i datum
Šibenik, Hrvatska, 20-24.07.2004

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Blasting ; hardness ; rouhness ; yield point ; ultimate strength ; fatigue

Sažetak
The paper analyses the influence of blasting conditions on the properties of steel sheet RSt 37-2 having the gauge of 3 mm. Due to blasting, the surface roughness increases by an order and the surface strain hardening takes place to the depth of ca 0.06 mm, which results in compressive stress on the sheet surface. The above-mentioned changes, among others, increase the yield point and decrease the fatigue life in the tension-zero cycle. The increase of the yield point and the decrease of the fatigue life are more significant if the diameter of the blasting medium (within the tested interval from 0, 56 to 0, 9 mm) and the impact angle (30 to 75°) are greater at the air pressure of 0, 4 to 0, 5 MPa.

Izvorni jezik
Engleski

Znanstvena područja
Metalurgija

Napomena
Izlaganje je objavljeno i kao cjeloviti rad u: Metalurgija (0543-5846) 43 (2004), 2 ; 101-105.



POVEZANOST RADA


Autor s matičnim brojem:
Ilija Mamuzić, (27862)