Einfluss der Modelldicke auf die Formzahlen bei Kerbspannungsproblemen (CROSBI ID 486573)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Kodvanj, Janoš ; Eberhardsteiner, Josef ; Beer, Rudolf ; Jecić, Stjepan
njemački
Einfluss der Modelldicke auf die Formzahlen bei Kerbspannungsproblemen
The calculated stressdistribution in complex components of engineer structures with notches is strongly influenced by methods used. As a consequence the result of stress concentration factors a for equal problems with a small dimensions of the notched area compared with the dimension of the cross section in which the nominal normal stress was calculated, mentioned in the literature differ considerably. In this paper it is shown that the result of the calculation of a is not only influenced by the geometrical relations in the notches areas but also by Poisson´s ratio of the material. This is especially important by using the photoelastic stress freezing method for determining the state of stress in the notched area.
Formzahl; Spannungsverteilung; Kerbe
nije evidentirano
engleski
Influence of the model thickness to the stress concentration factors
nije evidentirano
stress concentration factor; stressdistribution; notch
nije evidentirano
Podaci o prilogu
77-82-x.
2001.
objavljeno
Podaci o matičnoj publikaciji
VDI-Berichte
J, Naumann
Düsseldorf: VDI Verlag GmbH
Podaci o skupu
GESA Symposium 2001
poster
17.05.2001-18.05.2001
Chemnitz, Njemačka