Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

The Use Of New Technologies For The Development Of Protective Clothing: Comparative Analysis Of Body Dimensions Of Static And Dynamic Postures And Its Application (CROSBI ID 258674)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Bogović, Slavica ; Stjepanovič, Zoran ; Cupar, Andrej ; Jevšnik, Simona ; Rogina-Car, Beti ; Rudolf, Andreja The Use Of New Technologies For The Development Of Protective Clothing: Comparative Analysis Of Body Dimensions Of Static And Dynamic Postures And Its Application // AUTEX research journal, 19 (2019), 4; 301-311. doi: 10.1515/aut-2018-0059

Podaci o odgovornosti

Bogović, Slavica ; Stjepanovič, Zoran ; Cupar, Andrej ; Jevšnik, Simona ; Rogina-Car, Beti ; Rudolf, Andreja

engleski

The Use Of New Technologies For The Development Of Protective Clothing: Comparative Analysis Of Body Dimensions Of Static And Dynamic Postures And Its Application

In this research, the use of new technologies for the development of special protective overall for sport aircraft pilots was studied, with a focus on a comparative analysis of the static and dynamic body postures’ dimensions, intended for the development of the overall’s pattern design. For this purpose, digitalization of five male persons was carried out with the 3D human body scanner Vitus Smart by using 3D printed markers, precisely positioned on defined body locations, intended for exact measurement of body dimensions. Male persons, aged between 19 and 35 years with the same athletic body type and different body heights and body mass indexes (BMIs), were scanned in a standard static standing body posture and three dynamic body postures. A comparative analysis between the static and dynamic body postures was carried out. Based on the established body dimensions and girth dimensions of the 3D body model with 3D-modeled compression elements, made-to-measure construction of the overall pattern design was carried out. The function of these compression elements is redistribution of the blood from the lower extremities to the upper body parts at the appearance of high g-forces. Therefore, increased girth dimensions due to the use of compression elements were applied in the overall development process as construction measures with needed ease allowances. The functionality of the developed special protective overall was explored on the scanned 3D body model with 3D-modeled compression elements in a real sitting posture of the sport aircraft pilot in a cab by using virtual prototyping. The virtual simulation technology showed that a well-fitted protective overall for sport aircraft pilots can be developed by using a 3D scanned body model of a person in a sitting posture and its 3D body dimensions.

Anti-g suit ; 3D scanning ; body measurements ; clothing pattern design ; clothing virtual simulation

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

19 (4)

2019.

301-311

objavljeno

1470-9589

2300-0929

10.1515/aut-2018-0059

Povezanost rada

Tekstilna tehnologija

Poveznice
Indeksiranost