Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

The PlasmaArt Project – Application of Atmospheric-Pressure Plasma Jets in Conservation-Restoration of Wooden Objects (CROSBI ID 258578)

Prilog u časopisu | izvorni znanstveni rad | domaća recenzija

Krstulović, Nevena ; Bielen, Ana ; Mudronja, Domagoj ; Babić, Ivana ; Krstulović, Nikša The PlasmaArt Project – Application of Atmospheric-Pressure Plasma Jets in Conservation-Restoration of Wooden Objects // Portal-libraries and the academy, 9 (2018), 145-158. doi: 10.17018/portal.2018.10

Podaci o odgovornosti

Krstulović, Nevena ; Bielen, Ana ; Mudronja, Domagoj ; Babić, Ivana ; Krstulović, Nikša

engleski

The PlasmaArt Project – Application of Atmospheric-Pressure Plasma Jets in Conservation-Restoration of Wooden Objects

The PlasmaArt project was realized as a collaboration between the Institute of Physics and the Croatian Conservation Institute. The project was funded mainly by the Funds of the Adris Group, and to a lesser extent by project IP-11-2013-2753 of the Croatian Science Foundation. The main idea of the project was to test the application of cold atmospheric plasma jets on wooden test plates that simulate wooden artwork for the purpose of disinfection and removal of stratigraphic layers of overpaint. For ethical reasons, experimental research was carried out not on real artwork, but on wooden test plates which had been prepared to simulate wooden artefacts. (The samples were silver- plated and gold-plated plates, painted and varnished to faithfully represent real artwork.) To test the efficiency of the disinfection effect, some of the test plates were contaminated with fungal mycelia, and to test the removal of stratigraphic layers, the rest of the silver-plated and gold-plated test plates were covered with several layers of paint and varnish. The prepared test plates were treated with cold atmospheric-pressure plasma jets. The results showed that the stratigraphic layers could not be removed, and it was not possible to remove each layer separately. As a result of the disinfection procedure, positive effects were obtained in comparison to standard procedures used in conservation, while the efficiency depended on the type of plasma and the length of the treatment. It was found that the cold atmospheric-pressure plasma jet was an effective source for disinfection of wooden artwork in the conditions described in this paper

Conservation-restoration of wooden art, disinfection, wood-rotting fungi, cold atmospheric plasma jet, plasma technology, plasma disinfection, treating material using plasma

We acknowledge the Adris Foundation for the main financial support of the PlasmaArt project.

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

9

2018.

145-158

objavljeno

1531-2542

1530-7131

10.17018/portal.2018.10

Povezanost rada

Fizika, Biologija, Interdisciplinarno umjetničko polje

Poveznice
Indeksiranost