Characterisation of Surfaces on the Offset Printing Plate (CROSBI ID 486518)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Gojo, Miroslav ; Lovreček, Mladen
engleski
Characterisation of Surfaces on the Offset Printing Plate
By introducing the computers in the process, new materials are beein applied, bringing new conditions in the offset platemaking process. Alternative solutions are used concerning different substrates, like tracing paprer, and termo-stable foils, with are competitive in price and time to conventional materials, like lith film. Wetting of the printing and non-printing areas with a fountain solution was investigated in this paper, depending on the time of exposure to the light source, and with test images obtained on different substrates. The results are shown a possibility of application of such alternative materials, but within a limited range of exposures.
Contact angle; Electrical conductivity; Fountain solutions; pH value; Printing plate
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
253-260-x.
1998.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of Lectures and Posters, 1st International Symposium of Novelties in Graphics
Ljubljana: Faculty of Natural Sciences and Engineering
Podaci o skupu
1st International Symposium of Novelties in Graphics
predavanje
15.10.1998-16.10.1998
Ljubljana, Slovenija