Napredna pretraga

Pregled bibliografske jedinice broj: 966976

H2 optimization and numerical study of inerter-based vibration isolation system helical spring fatigue life


Čakmak, Damjan; Tomičević, Zvonimir; Wolf, Hinko; Božić, Željko
H2 optimization and numerical study of inerter-based vibration isolation system helical spring fatigue life // Archive of applied mechanics, 89 (2019), 7; 1221-1242 doi:10.1007/s00419-018-1495-2 (međunarodna recenzija, članak, znanstveni)


Naslov
H2 optimization and numerical study of inerter-based vibration isolation system helical spring fatigue life

Autori
Čakmak, Damjan ; Tomičević, Zvonimir ; Wolf, Hinko ; Božić, Željko

Izvornik
Archive of applied mechanics (0939-1533) 89 (2019), 7; 1221-1242

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Vibration isolation ; fatigue life ; inerter ; helical spring ; finite element method ; H2 optimization

Sažetak
This paper presents an optimization and numerical analysis of vibration-induced fatigue in a two degree-of-freedom inerter-based vibration isolation system. The system is comprised of a primary, e.g. source body, and a secondary, e.g. receiving body, mutually connected through an isolator. The isolator includes a spring, a dashpot and an inerter. Inerter is a mechanical device which produces a force proportional to relative acceleration between its terminals. A broadband frequency force excitation of the primary body is imposed throughout the study. The goal of the proposed optimization is to prolong the fatigue life of the ground connecting helical spring of the secondary body. The optimization is based on minimizing separately the displacement and velocity amplitudes. Both optimization criteria are compared with regard to spring fatigue-life improvement for fair benchmark comparison. The inerter-based optimized systems, in which the H2 index of the receiving body is minimized, are also compared with the optimized systems without inerter. Notable improvements are observed in inerter-based systems due to the inclusion of an optimally tuned inerter in the isolator. The proposed analytical vibration fatigue method optimization results are compared with the finite element method results and a very good agreement is observed. Most accurate helical spring deflection and stress correction factors are discussed and determined. Furthermore, the inerter concept is successfully implemented into finite element based dynamic solution.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Ustanove
Fakultet strojarstva i brodogradnje, Zagreb

Časopis indeksira:


  • Current Contents Connect (CCC)
  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus


Citati