Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Longitudinal and tangential coefficients of chip compression in orthogonal wood cutting (CROSBI ID 256114)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Radmanović, Kristijan ; Đukić, Igor ; Merhar, Miran ; Šafran, Branimir ; Jug, Matija ; Beljo Lučić, Ružica. Longitudinal and tangential coefficients of chip compression in orthogonal wood cutting // BioResources, 13 (2018), 4; 7998-8011. doi: 10.15376/biores.13.4.7998-8011

Podaci o odgovornosti

Radmanović, Kristijan ; Đukić, Igor ; Merhar, Miran ; Šafran, Branimir ; Jug, Matija ; Beljo Lučić, Ružica.

engleski

Longitudinal and tangential coefficients of chip compression in orthogonal wood cutting

The complexity of the cutting zone makes it impossible to establish a reliable, simple, and comprehensive mathematical model for orthogonal wood cutting. Thus far, the science of cutting materials have used only approximate and simplified engineering theories that attempt to explain the mechanisms of chip shaping. The research of wood processing by chip separation is mostly based on models developed for metal processing. By applying Astakhov’s model to orthogonal wood cutting, the total cutting power is divided into four components, and each cutting force component can be theoretically related to the coefficients of chip compression. In the present study, longitudinal, and tangential coefficients of chip compression were determined experimentally during orthogonal cutting of wood in the longitudinal (0 – 90) direction depending on wood moisture content (MC) and cutting speed. The direction of the fibers, cutting speed, and MC influenced the ​​ coefficient of chip compression. The MC of wood above the fiber saturation point significantly changed the impact of the cutting speed on the tangential coefficient of chip compression. In order to explain and better understand the obtained results of chip compression coefficients, the modulus of elasticity (MOE) of wood samples with different MC was determined. The MOE was calculated from the compression tests on small specimens in tangential and longitudinal direction.

Orthogonal wood cutting ; Chip compression ; Longitudinal and tangential coefficients ; Cutting speed ; Modulus of elasticity ; Wood moisture content

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

13 (4)

2018.

7998-8011

objavljeno

1930-2126

10.15376/biores.13.4.7998-8011

Trošak objave rada u otvorenom pristupu

Povezanost rada

nije evidentirano

Poveznice
Indeksiranost