Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Influence of solution hardening on microstructure and mechanical properties of Al-2.5Mg-0.7Li alloy (CROSBI ID 668090)

Prilog sa skupa u zborniku | kratko priopćenje | međunarodna recenzija

Kozina, Franjo ; Zovko Brodarac, Zdenka ; Petrič Mitja Influence of solution hardening on microstructure and mechanical properties of Al-2.5Mg-0.7Li alloy // The 73rd World Foundry Congress, Congress Proceedings. Krakov: Polish Foundrymen's Association, 2018. str. 21-22

Podaci o odgovornosti

Kozina, Franjo ; Zovko Brodarac, Zdenka ; Petrič Mitja

engleski

Influence of solution hardening on microstructure and mechanical properties of Al-2.5Mg-0.7Li alloy

Although utilization of lightweight aluminum alloys in transportation industry reduced harmful emissions and improves fuel economy, their further application is limited by low stiffness, low Young modulus and sensitivity to elevated temperatures. It was found that specific strength properties of aluminum alloys can be improved by Li additions. The beneficial effect is achieved by precipitation of hardening Al3Li precipitate. The microstructural and mechanical properties of Al-2.5 Mg-0.7 Li alloy were investigated in as cast and solution hardened condition. The microstructure constituents and thermo-mechanical properties for both conditions were determined and compared.

Al-2.5Mg-0.7Li alloy, solution hardening, microstructure, thermo-mechanical testing, mechanical properties

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

21-22.

2018.

nije evidentirano

objavljeno

978-83-904306-3-8

Podaci o matičnoj publikaciji

The 73rd World Foundry Congress, Congress Proceedings

Krakov: Polish Foundrymen's Association

Podaci o skupu

73rd World Foundry Congress

predavanje

23.08.2018-27.08.2018

Kraków, Poljska

Povezanost rada

Metalurgija