Napredna pretraga

Pregled bibliografske jedinice broj: 96415

On the sensitivity of residual stresses determined using the hole-drilling method


Barle, Jani; Grubišić, Vatroslav; Jecić, Stjepan
On the sensitivity of residual stresses determined using the hole-drilling method // Naše more-pomorski znanstveni časopis, 3-4 (2001), 48; 137-144 (međunarodna recenzija, članak, znanstveni)


Naslov
On the sensitivity of residual stresses determined using the hole-drilling method

Autori
Barle, Jani ; Grubišić, Vatroslav ; Jecić, Stjepan

Izvornik
Naše more-pomorski znanstveni časopis (0469-6255) 3-4 (2001), 48; 137-144

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Residual stress measurement; hole drilling technique; sensitivity

Sažetak
The objective of this paper is to examine the effects of measurement error on residual stresses evaluated with the Hole drilling and Integral Method calculation. A detailed analysis of causes and magnitudes of strain measurement error is beyond the scope of this paper. The indicators needed for the error estimation and depth increment distributions with respect to systematic and random errors are discussed. It is shown that the maximum attention must be devoted to random errors. According to presented result it was concluded that practically no more than three points of residual stress distribution can be calculated.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
023041

Ustanove
Fakultet elektrotehnike, strojarstva i brodogradnje, Split

Časopis indeksira:


  • Scopus