Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Strain gage measurements in the new MAN/S50MC?C engine on the test bed at shipyard Split (CROSBI ID 486315)

Prilog sa skupa u zborniku | sažetak izlaganja sa skupa

Domazet, Željko ; Barle, Jani ; Đukić, Predrag Strain gage measurements in the new MAN/S50MC?C engine on the test bed at shipyard Split // Abstracts of the 18th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics / Beer, Rudolf J. (ur.). Beč: ASESA, 2001. str. 31-32-32

Podaci o odgovornosti

Domazet, Željko ; Barle, Jani ; Đukić, Predrag

engleski

Strain gage measurements in the new MAN/S50MC?C engine on the test bed at shipyard Split

The new MAN B&W 6S50MC-C engine was subjected to wide range of strain gage measurements during the test bed at shipyard Split. Stress measurements during the bearing caps tightening (static loads) showed amounts of max. 66 MPa, depending on gage location and orientation. All these stresses are far under the allowable stress and yield strength. Dynamic measured stress variations showed stress ranges of not more than 26 MPa, which means max. stress amplitudes of +-13 MPa, depending on gage location and orientation. All measurements have been successful and stresses at all critical bearing locations are not expected to cause significant damage within the predicted life of the structure.

diesel engines; fatigue; strain gage

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

31-32-32.

2001.

objavljeno

Podaci o matičnoj publikaciji

Abstracts of the 18th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics

Beer, Rudolf J.

Beč: ASESA

Podaci o skupu

Danubia-Adria Symposium on Experimental Methods in Solid Mechanics (18 ; 2001)

poster

26.09.2001-29.09.2001

Štajerska, Austrija

Povezanost rada

Strojarstvo