The properties of printing substrates required for thermochromic liquid - crystal printing inks (CROSBI ID 255771)
Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Strižić Jakovljević, Maja ; Lozo, Branka ; Klanjšek Gunde, Marta
engleski
The properties of printing substrates required for thermochromic liquid - crystal printing inks
The color change of thermochromic liquid- crystal (TLC) printing inks occurs inside the microcapsules containing thermo-responsive material. It starts at the defined activation temperature (TA) and occurs in several degrees wide region above the TA where the color changes throughout the whole visible spectrum, the effect known as "color play". Previous research showed that the "color play" effect of TLC printing ink is clearly visible if the ink is printed on a black substrate but on the white one no color can be observed. The presented research aims to answer what optical density of the substrate is needed for clear observation of the "color play" effect. The results show that mentioned effect of the TLC ink is observable if it is printed on grey substrate with optical density of at least 0.72. The research also shows that samples printed on uncoated black paper result in stronger temperature dependent optical properties of TLC printing ink compared to the samples printed on coated black paper. This effect is related to drying mechanism of TLC printing ink and absorption properties of printing substrate.
optical properties of substrate, thermochromic inks, liquid crystals, color play effect
Glavna autorica: Strižić Jakovljević, Maja.
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o izdanju
7 (4)
2018.
165-170
objavljeno
2223-8905
2414-6250
10.14622/JPMTR-1816
Povezanost rada
Grafička tehnologija