Three-Phase Programmable Sinusoidal Voltage Calibrator (CROSBI ID 667683)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Bosnić, Juraj Alojzije ; Despalatović, Marin ; Petrović Goran ; Majić, Goran
engleski
Three-Phase Programmable Sinusoidal Voltage Calibrator
Laboratory setup for generation of sinusoidal voltage of programmable amplitude, phase and frequency is presented in the paper. Core of the voltage generator is three-phase inverter with the LC filter which attenuates higher voltage harmonics, especially integer multiples of switching frequency. Control algorithm is developed in MATLAB/Simulink environment and compiled on dSPACE controller board. Advantage of this approach in comparison to traditional approach is in omission of voltage amplifier which is usually the most sophisticated and complicated setup component. Phase can be set in range 0 - 360 degrees and voltage amplitude is limited by the DC link voltage. DC link voltage is set to 150 V to emulate secondary side of voltage measuring transformers. Frequency can be changed in 0.5 Hz steps. Test setup hardware components, block diagram of control algorithm and performance results in time and frequency domain are presented.
Calibration, MATLAB, inverter, Fourier transform
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
29-32.
2018.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of First International Colloquium on Smart Grid Metrology 2018 (SMAGRIMET 2018)
Ivšić, Branimir ; Jurčević, Marko
Zagreb: Fakultet elektrotehnike i računarstva Sveučilišta u Zagrebu
978-953-184-234-1
Podaci o skupu
First International Colloquium on Smart Grid Metrology (SmaGriMet 2018)
poster
24.04.2018-27.04.2018
Split, Hrvatska