Napredna pretraga

Pregled bibliografske jedinice broj: 958339

Experimental investigation and multi-objective optimization of controllable parameters in turning process using Taguchi Method and Grey Relational Analysis


Dumanić, Ivana; Jozić, Sonja; Bajić, Dražen; Sučić, Mihovil
Experimental investigation and multi-objective optimization of controllable parameters in turning process using Taguchi Method and Grey Relational Analysis // Mechanical Technologies and Structural Materials MTSM2018
Split, Hrvatska, 2018. str. 13-21 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Experimental investigation and multi-objective optimization of controllable parameters in turning process using Taguchi Method and Grey Relational Analysis

Autori
Dumanić, Ivana ; Jozić, Sonja ; Bajić, Dražen ; Sučić, Mihovil

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Mechanical Technologies and Structural Materials MTSM2018 / - , 2018, 13-21

Skup
CROATIAN SOCIETY FOR MECHANICAL TECHNOLOGIES

Mjesto i datum
Split, Hrvatska, 27-28.09.2018

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Turning, MQL, Compressed cold air cooling, Grey relational analysis, Multi-objective optimization

Sažetak
In the present research work investigation of different cutting conditions such as dry machining, minimum quantity lubrication (MQL) and MQL with compressed cold air on average surface roughness, cutting force and material removal rate is presented. Experiments were designed based on three input parameters (cutting speed, feed rate and depth of cut) and three different cutting environments when turning of EN AW-2011 alloy. The Taguchi-based grey relational analysis during longitudinal turning was used to identify the optimal process parameters by which will be achieved minimum surface roughness, minimum cutting force and maximum material removal rate. The results showed that dry machining, high cutting speed, low feed rate and intermediate depth of cut gives the best machining performances.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Ustanove
Fakultet elektrotehnike, strojarstva i brodogradnje, Split

Časopis indeksira:


  • Scopus