Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 957799

The influence of pH and electrolyte temperature on corrosion behaviour of CuAlMnTi alloy ribbons in NaCl solution


Vrsalović, Ladislav; Jerčić, Radosna; Gudić, Senka; Ivanić, Ivana; Kožuh, Stjepan; Kosec, Borut; Bizjak, Milan; Gojić, Mirko
The influence of pH and electrolyte temperature on corrosion behaviour of CuAlMnTi alloy ribbons in NaCl solution // Proceedings of 8th International Conference Mechanical Technologies and Structural Materials 2018 / Jozić, Sonja ; Gjeldum, Nikola (ur.).
Split: Croatian Society for Mechanical Technologies, 2018. str. 193-198 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 957799 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
The influence of pH and electrolyte temperature on corrosion behaviour of CuAlMnTi alloy ribbons in NaCl solution

Autori
Vrsalović, Ladislav ; Jerčić, Radosna ; Gudić, Senka ; Ivanić, Ivana ; Kožuh, Stjepan ; Kosec, Borut ; Bizjak, Milan ; Gojić, Mirko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of 8th International Conference Mechanical Technologies and Structural Materials 2018 / Jozić, Sonja ; Gjeldum, Nikola - Split : Croatian Society for Mechanical Technologies, 2018, 193-198

Skup
8th International Conference Mechanical Technologies and Structural Materials 2018

Mjesto i datum
Split, Hrvatska, 27-28.09. 2018

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
CuAlMnTi alloy ; NaCl solution ; corrosion ; polarization ; SEM/EDS
(CuAlMnTi alloy ; NaCl solution ; corrosion ; polarization ; SEM/EDS ;)

Sažetak
The influence of pH and temperature of 0.9% NaCl solution on corrosion behavior of CuAlMnTi alloy ribbons, produced by rapid solidification using melt spinning method, were investigated by electrochemical methods. Open circuit potential measurement, linear and potentiodynamic polarization were employed during the investigation, and the measurements were conducted in the electrolyte temperature of 10, 24, 37 and 50 oC and in solution pH of 7.4, 5.4 and 3.4. In has been found that corrosion rate generally increase with increasing the temperature of the electrolyte while the influence of pH change on CuAlNiTi ribbon corrosion is little less pronounced. After polarization measurements CuAlNiTi ribbon surfaces were investigated with light microscope and with SEM/EDS analysis.

Izvorni jezik
Engleski

Znanstvena područja
Kemijsko inženjerstvo, Metalurgija



POVEZANOST RADA


Projekt / tema
HRZZ-IP-2014-09-3405 - Dizajniranje mikrostrukture i funkcionalnih svojstava legura s prisjetljivosti oblika na bazi bakra (DMFP-CuSMA) (Gojić, Mirko, HRZZ - 2014-09 )

Ustanove
Kemijsko-tehnološki fakultet, Split,
Metalurški fakultet, Sisak

Profili:

Avatar Url Mirko Gojić (autor)

Avatar Url Senka Gudić (autor)

Avatar Url Ivana Ivanić (autor)

Avatar Url Ladislav Vrsalović (autor)

Avatar Url Stjepan Kožuh (autor)

Citiraj ovu publikaciju

Vrsalović, Ladislav; Jerčić, Radosna; Gudić, Senka; Ivanić, Ivana; Kožuh, Stjepan; Kosec, Borut; Bizjak, Milan; Gojić, Mirko
The influence of pH and electrolyte temperature on corrosion behaviour of CuAlMnTi alloy ribbons in NaCl solution // Proceedings of 8th International Conference Mechanical Technologies and Structural Materials 2018 / Jozić, Sonja ; Gjeldum, Nikola (ur.).
Split: Croatian Society for Mechanical Technologies, 2018. str. 193-198 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Vrsalović, L., Jerčić, R., Gudić, S., Ivanić, I., Kožuh, S., Kosec, B., Bizjak, M. & Gojić, M. (2018) The influence of pH and electrolyte temperature on corrosion behaviour of CuAlMnTi alloy ribbons in NaCl solution. U: Jozić, S. & Gjeldum, N. (ur.)Proceedings of 8th International Conference Mechanical Technologies and Structural Materials 2018.
@article{article, year = {2018}, pages = {193-198}, keywords = {CuAlMnTi alloy, NaCl solution, corrosion, polarization, SEM/EDS, }, title = {The influence of pH and electrolyte temperature on corrosion behaviour of CuAlMnTi alloy ribbons in NaCl solution}, keyword = {CuAlMnTi alloy, NaCl solution, corrosion, polarization, SEM/EDS, }, publisher = {Croatian Society for Mechanical Technologies}, publisherplace = {Split, Hrvatska} }




Contrast
Increase Font
Decrease Font
Dyslexic Font