Microstructure and thermal analysis of the low melting Bi–In eutectic alloys (CROSBI ID 666101)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Manasijević, Ivana ; Balanović, Ljubiša ; Holjevac Grgurić, Tamara ; Gorgievski, Milan ; Minić, Duško ; Premović Milena
engleski
Microstructure and thermal analysis of the low melting Bi–In eutectic alloys
Microstructure and thermal properties of the low melting Bi–In eutectic alloys were investigated in this work. Three eutectic alloys (Bi–47.44 at.% In, Bi–66.33 at.% In, Bi– 77.92 at.% In) were prepared by induction melting of pure elements. Microstructure of the alloys was analyzed using scanning electron microscopy (SEM) with energy dispersive X-ray spectrometry (EDS) and identification of co- existing phases was done. Differential scanning calorimetry (DSC) was applied for determination of melting temperatures and latent heats of eutectic melting. Experimentally obtained results were compared with the results of thermodynamic calculation according to CALPHAD (calculation of phase diagram) method and good mutual agreement was observed.
Bi–In system ; eutectic alloy ; latent heat of melting ; microstructure
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
334-342.
2018.
objavljeno
Podaci o matičnoj publikaciji
17th International Foundrymen Conference
Sisak: Metalurški fakultet Sveučilišta u Zagrebu
Podaci o skupu
17th International Foundrymen Conference: High- tech casting solution and knowledge based engineering
poster
16.05.2018-18.05.2018
Opatija, Hrvatska