The research of influence by application of welded ploughshares on the efficiency of tractor's work during ploughing (CROSBI ID 665581)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Marušić, Vlatko ; Opačak, Ivan ; Marušić, Ante ; Kljajić, Petar
engleski
The research of influence by application of welded ploughshares on the efficiency of tractor's work during ploughing
Standard and welded ploughshares were tested. The standard ploughshares are made of steel 50Mn7. The welded ploughshares are made by applying C-Cr-Co-Ni-Si additional material on the same steel. The research was carried out by using two tractors with two four-furrow plough of the same power in a total of 360 working hours, and a total of 180 hours of ploughing with each ploughshare. The average achieved effect of ploughing with standard ploughshares was 0, 85 ha/h with fuel consumption of 29, 70 l/ha. With welded ploughshares was achieved the average effect of 0, 90 ha/h with average fuel consumption of 28, 30 l/ha. Based on these preliminary results of research it was concluded that the welding layer which containing Cr carbides can be affected to increase the efficiency of ploughing.
ploughshares ; fuel consumption ; working effect ; efficiency of ploughing
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
29-36.
2018.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 8th International Conference "Economics and Management - Based on New Technologies" (EMoNT-2018)
Dašić, Predrag
Vrnjačka Banja: SaTCIP Publisher Ltd.
1086-6075-064-0
Podaci o skupu
8th International Conference Economics and Management - Based on New Technologies (EMoNT 2018)
pozvano predavanje
25.06.2018-28.06.2018
Vrnjačka Banja, Srbija