Microstructure and corrosion resistance in TIG welded joint of Hastelloy C-22 alloy (CROSBI ID 665386)
Neobjavljeno sudjelovanje sa skupa | neobjavljeni prilog sa skupa
Podaci o odgovornosti
Bušić, Matija ; Garašić, Ivica ; Zoran, Kožuh ; Jakovljević, Suzana ; Šimunović Vinko
engleski
Microstructure and corrosion resistance in TIG welded joint of Hastelloy C-22 alloy
Nickel alloys are used because of their corrosion resistance, heat resistance and high and low temperature properties. In this article types of nickel-chromium-molybdenum alloys are described and guidance is given on welding processes and techniques which can be used in fabricating nickel alloy components without impairing their corrosion or microstructure properties. Tungsten Inert Gas of 7 mm thick nickel based alloy HASTELLOY C-22 has been conducted in butt joint configuration. The need for complex and detailed preparation of plates prior the welding, and welding discipline has been presented. Microstructure of the weld metal and heat affected zone was examined using scanning electron microscope. Composition of the weld metal and heat affected zone was examined using X-ray fluorescence analyser. Comparative electrochemical corrosion tests were conducted to determine the influence of welding on corrosion resistance properties.
TIG welding, Hastelloy, Microstructure, SEM, Corrosion
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
nije evidentirano
nije evidentirano
Podaci o skupu
Fems Junior Euromat Conference 2018
predavanje
08.07.2018-12.07.2018
Budimpešta, Mađarska