Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 94814

Some circular saw cutting consideration


Goglia, Vlado; Đukić, Igor
Some circular saw cutting consideration // Technologies of wood processing / Trebula, Pavel ; Klement, Ivan (ur.).
Zvolen: Technicka univerzita vo Zvolene, 2002. str. 73-79 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 94814 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Some circular saw cutting consideration

Autori
Goglia, Vlado ; Đukić, Igor

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Technologies of wood processing / Trebula, Pavel ; Klement, Ivan - Zvolen : Technicka univerzita vo Zvolene, 2002, 73-79

Skup
Technologies of wood processing

Mjesto i datum
Zvolen, Slovačka, 10-11.09.2002

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
circular saw; cutting height; specific cutting energy

Sažetak
The paper deals with the measurement results of cutting forces on a circular saw. Circular saw blade diameter, cutting height and workpiece material were the same during measurements. The influence of the circular saw blade position on cutting efficiency was investigated. The saw blade diameter was 300 mm, cutting height 12 mm and the workpiece material was fir. The saw blade position has been changed so that the distance between the work piece surface and the tangent to the saw blade ranged from 74 to 2 mm. The cutting forces were measured in both, the horizontal and the vertical direction.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo, Šumarstvo, Biotehnologija



POVEZANOST RADA


Projekti:
0068139

Ustanove:
Šumarski fakultet, Zagreb

Profili:

Avatar Url Igor Đukić (autor)

Avatar Url Vlado Goglia (autor)

Citiraj ovu publikaciju

Goglia, Vlado; Đukić, Igor
Some circular saw cutting consideration // Technologies of wood processing / Trebula, Pavel ; Klement, Ivan (ur.).
Zvolen: Technicka univerzita vo Zvolene, 2002. str. 73-79 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Goglia, V. & Đukić, I. (2002) Some circular saw cutting consideration. U: Trebula, P. & Klement, I. (ur.)Technologies of wood processing.
@article{article, year = {2002}, pages = {73-79}, keywords = {circular saw, cutting height, specific cutting energy}, title = {Some circular saw cutting consideration}, keyword = {circular saw, cutting height, specific cutting energy}, publisher = {Technicka univerzita vo Zvolene}, publisherplace = {Zvolen, Slova\v{c}ka} }




Contrast
Increase Font
Decrease Font
Dyslexic Font