Batch dyeing of 3D printed acrylonitrile/butadiene/styrene with disperse dyestuff (CROSBI ID 663944)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Kutnjak-Mravlinčić, Suzana ; Godec, Damir ; Sutlović, Ana
engleski
Batch dyeing of 3D printed acrylonitrile/butadiene/styrene with disperse dyestuff
This paper’s research presents the possibility of batch dyeing three-dimensional printed acrylonitrile/butadiene/styrene (ABS) with disperse dyestuff. The aim of this investigation is achieving a wide range of hues and colour effects for 3D ABS materials. The 3D process encompasses a wide range of applications, primarily because of the large number of available materials for the production of products. ABS was selected because of its good balance of properties, toughness/strength/temperature resistance, coupled with its ease of moulding and a high quality surface finish. The applied method has provided very good results according to the CIELab colour parameters range, and rubbing fastness.
3D printing ; batch dyeing ; disperse dyestuff
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
96-100.
2018.
objavljeno
Podaci o matičnoj publikaciji
VI Scientific-vocational conference with international participation "Development tendencies in the textile industry – Design, Technology, Management"
Savanović, Goran
Beograd: The College of Textile Design, Technology and Management
978-86-87017-42-9
Podaci o skupu
VI Scientific-vocational Conference "Development Tendencies in the Textile Industry – Design, Technology, Management"
ostalo
27.06.2018-27.06.2018
Beograd, Srbija