The influence of the PCM content on the properties of electrospun thermoregulating material (CROSBI ID 663208)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Zdraveva, Emilija ; Mijović, Budimir ; Skenderi, Zenun
engleski
The influence of the PCM content on the properties of electrospun thermoregulating material
This paper focuses on the fabrication and characterization of electrospun thermoregulating fabrics incorporating phase change materials (PCM). The influence of the PCM content on the electrospun fibers morphology, thermal stability, phase change sustainability and heat storing was examined. The fibers showed cylindrical shapes and rough surfaces. The 14 % surfactant resulted in beads disappearance for both 30 and 50 wt% PCM. The PCM amount did not affected too much materials’ temperature weight loss. Higher encapsulation efficiency above 30 % was calculated for the PCM 50 wt%. These fabrics are good candidates for protective clothing as can regulate the temperature near the human skin and are lightweight, thus improving body comfort.
Electrospun ; emulsion ; PVA ; PCM ; thermoregulation
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
361-366.
2018.
objavljeno
Podaci o matičnoj publikaciji
Book of Proceedings - 7th International Ergonomics Conference - ERGONOMICS 2018 - Emphasis on Wellbeing
Sumpor, Davor ; Salopek Čubrić, Ivana ; Jurčević Lulić, Tanja ; Čubrić, Goran
Zagreb: Hrvatsko ergonomijsko društvo
2584-5012
Podaci o skupu
7th International Ergonomics Conference ERGONOMICS 2018 - Emphasis on Wellbeing
poster
13.06.2018-16.06.2018
Zadar, Hrvatska