Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Rapid Protototyping of Rifle for Underwater Fishing by the Application of the Reverse Engineering (CROSBI ID 658058)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Kušec, Krunoslav ; Pavlic, Tomislav ; Boščić, Drago ; Švegović, Mario ; Golubić, Stjepan ; Britvić, Alen Rapid Protototyping of Rifle for Underwater Fishing by the Application of the Reverse Engineering // Proceedings of the CIM 2017-16th International Scientific Conference on Production Engineering / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir (ur.). Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2017. str. 171-176

Podaci o odgovornosti

Kušec, Krunoslav ; Pavlic, Tomislav ; Boščić, Drago ; Švegović, Mario ; Golubić, Stjepan ; Britvić, Alen

engleski

Rapid Protototyping of Rifle for Underwater Fishing by the Application of the Reverse Engineering

A quality developing process and the rapid production of the complex products using new technologies are increasingly important in the race with fierce competition. Methods and procedures in the process of developing new products that are produced by material-removal process and additive technologies are the subject of this paper. At the beginning of every new product developing process, there is an idea. A good idea is the key segment of every new product. In the paper, basic additive technologies (FDM 3D printing technology and laser 3D scanning) are described and explained, as well as the software tools needed to create their own models. For 3D modeling is used CAD software SolidWorks. Programming, and generating G-Code, was performed by the CAM software Solidcam. For the purpose of experimental checking and design of the prototype, is used a postprocessor which has been developed at the Technical College in Bjelovar as a link between Solidcam and CNC Siemens Sinumerik 840 Dsl. The prototype of the developed product was first made using additive technology and then was made on a three-axis CNC milling machine which is made for such kind of purpose at the Technical College in Bjelovar. Emphasis was also placed on the used 3D printer MakerBot Replicator 2x and used 3D scanner MakerBot Digitizer. From software tools, which are an indispensable part of using additive technologies, in this work are used program tools MakerBot Desktop, MakerWare for Digitazer and Autodesk Meshmixer.

Reverse engineering, Rapid prototyping CAD, CAM, CNC, postprocessor

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

171-176.

2017.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of the CIM 2017-16th International Scientific Conference on Production Engineering

Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir

Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS)

978-953-7689-03-2

2584-3214

Podaci o skupu

CIM 2017-16th International Scientific Conference on Production Engineering

predavanje

08.06.2017-10.06.2017

Zadar, Hrvatska

Povezanost rada

nije evidentirano