GAS COMPOSITION INFLUENCE ON THEMICROSTRUCTURE AND GEOMETRY OF LASER-WELDED JOINTS IN DUPLEX STAINLESS STEEL (CROSBI ID 657683)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Topić, Angela ; Bauer, Branko ; Kožuh, Zoran ; Knezović, Nikola
engleski
GAS COMPOSITION INFLUENCE ON THEMICROSTRUCTURE AND GEOMETRY OF LASER-WELDED JOINTS IN DUPLEX STAINLESS STEEL
Shielding gases, i.e., argon or an argon-nitrogen mixture, are normally used during the laser-beam welding of duplex stainless steel. Helium is also often added to the argon. The effect of the type of shielding gas – argon, nitrogen, helium and their mixtures – on the geometrical characteristics of laser-welded joints of the duplex steel W.Nr. 1.4462 was studied. The welding was carried out according to the experimental model with mixtures. The effect of the welding speed and the gas flow rate were additionally explored using a factorial experiment. Obtained data were statistically processed and mathematical modeling, applying the method of response surfaces, was carried out. The analysis revealed that the impact of the shielding gas mixtures on the geometrical characteristics of the joint is significant, while it is not so significant for the microstructure. The effect of the gas flow rate on the geometrical characteristics was registered, while the effect of the heat input is the most significant. Special cubic, quadratic and reduced quadratic models, depicting effects of the shielding gas on geometrical characteristics and microstructure of welded joint, were obtained.
laser ; welding ; duplex steel ; shielding gas ; weld geometry ; microstructure
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
734-742.
2016.
objavljeno
10.2507/27th.daaam.proceedings.106
Podaci o matičnoj publikaciji
27TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION
Beč:
978-3-902734-08-2
1726-9679
Podaci o skupu
27TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION
poster
26.10.2016-29.10.2016
Beč, Austrija