COMBINATION OF CONTACT AND OPTICAL 3D DIGITIZING METHODS FOR THEIR APPLICATION IN REVERSE ENGINEERING (CROSBI ID 657111)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Sokac, Mario ; Željko, Santoši ; Budak, Igor ; Car, Zlatan ; Đorđe, Vukelić
engleski
COMBINATION OF CONTACT AND OPTICAL 3D DIGITIZING METHODS FOR THEIR APPLICATION IN REVERSE ENGINEERING
With the development of modern-day 3D digitizing systems, both contact and optical, the field of their implementation drastically expanded. This ensured that different types of 3D digitizing systems have found their place in different areas of science and industry worldwide. But, as their implementation expanded, so did the demand for better and more precise 3D digitizing results of complex parts. In this paper a new approach will be shown where both contact and optical system will be combined in order to exploit their advantages. Those systems are, for optical 3D digitizing systems close-range photogrammetry, and as a contact 3D digitizing system a 3D digitizer (ie. measurement arm). They will be used together in order to fully digitize the object, by exploiting their benefits. In this way advantages of both systems combined together will aid in providing the best possible result. A brief discussion on combination of these systems will be given, and also dimensional analysis will be performed on the 3D digitizing result as a verification measure.
reverse engineering ; 3D digitization ; optical scanner ; contact scanner ; point cloud
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
65-68.
2017.
objavljeno
Podaci o matičnoj publikaciji
International Conference on Innovative Technologies, IN-TECH 2017
Pepelnjak, Tomaž ; Car, Zlatan ; Kudláček, Jan
Ljubljana: Jaromer, Czech Republic : Faculty of Engineering, University of Rijeka
0184-9069
Podaci o skupu
International Conference on Innovative Technologies IN-TECH 2017
predavanje
11.09.2017-13.09.2017
Ljubljana, Slovenija