Numerical Simulation of Lubricated Wire Rolling and Drawing (CROSBI ID 654171)
Prilog sa skupa u zborniku | sažetak izlaganja sa skupa
Podaci o odgovornosti
Škurić, Vanja ; Jasak, Hrvoje
engleski
Numerical Simulation of Lubricated Wire Rolling and Drawing
Numerical method for calculating lubricated contact pressures, friction and heat transfer during the metal forming simulations is presented in this study. Parameters of contact between metal forming tool (e.g. roller) and workpiece (e.g. wire, sheet) are important factors in metal forming processes since non-optimal frictional eff ects can result in lower productivity of process machinery, and in unacceptable shape and surface quality of the products. In order to control friction and heat transfer during the metal forming processes lubricant is applied between the tool and workpiece surfaces in contact.
Lubricated Contact, Finite Area Method, Reynolds Lubrication Equation, Metal Forming, Fluid-Structure Interaction
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
45-45.
2017.
objavljeno
Podaci o matičnoj publikaciji
Third Annual PhD Workshop
Zovko Brodarac, Zdenka ; Bauer, Branko ; Duić, Neven ; Jokić, Andrej ; Landek, Darko ; Lisjak, Dragutin ; Lulić, Zoran ; Majetić, Dubravko ; Matijević, Božidar ; Runje, Biserka ; Sorić, Jurica ; Terze, Zdravko
Zagreb: ITG d.o.o., Zagreb
978-953-7738-53-2
Podaci o skupu
Third Annual PhD Workshop - PhD Study of Mechanical Engineering, Naval Architecture, Aeronautical Engineering and Metallurgical Engineering
poster
30.06.2017-30.06.2017
Zagreb, Hrvatska