Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 89728

Tank Run-off Model Application on the Botonega Catchment


Plišić, Ivica; Petraš, Josip; Sopta, Luka; Holjević, Danko
Tank Run-off Model Application on the Botonega Catchment // Proceedings of the VII International Symposium on Water Management and Hydraulic Engineering / Bednarczyk, Stefan ; Szymkiewicz, Romuald ; Suligowski, Ziemowit (ur.).
Gdansk, Poland: MISIURO, 2001. str. 79-86 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 89728 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Tank Run-off Model Application on the Botonega Catchment

Autori
Plišić, Ivica ; Petraš, Josip ; Sopta, Luka ; Holjević, Danko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the VII International Symposium on Water Management and Hydraulic Engineering / Bednarczyk, Stefan ; Szymkiewicz, Romuald ; Suligowski, Ziemowit - Gdansk, Poland : MISIURO, 2001, 79-86

Skup
VII International Symposium on Water Management and Hydraulic Engineering

Mjesto i datum
Miedzybrodzie Žywieckie, Poland, 10-12.09.2001

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
"TANK" run-off model; creation; catchment area; model calibration; application

Sažetak
This work demonstrates the application mode of the "TANK" run-off model on the Botonega catchment in Istria, Croatia. Botonega catchment is the catchment area of a small water accumulation serving the purposes of balancing out the flood wave and water supply. Watertightness of the accumulation itself is good. Data from the meteorological station assembled within the catchment were on disposal, as well as water level measurements in the accumulation. On the basis of those data, model calibration and verification of inflow results in the accumulation, obtained by a simulation were conducted. The work describes model creation system, as well as model operation and its possible application. "Tank" model, as a mathematical run-off model system is simple to create. No catchment condition analyses are necessary to create the model, if there are reliable data for model calibration. Simulation results obtained through this model are satisfactory in application, during the compiling of regulation book for accumulation management.

Izvorni jezik
Engleski

Znanstvena područja
Građevinarstvo



POVEZANOST RADA


Projekti:
082008

Ustanove:
Građevinski fakultet, Zagreb

Profili:

Avatar Url Luka Sopta (autor)

Avatar Url Josip Petraš (autor)

Avatar Url Danko Holjević (autor)

Avatar Url Ivica Plišić (autor)


Citiraj ovu publikaciju:

Plišić, Ivica; Petraš, Josip; Sopta, Luka; Holjević, Danko
Tank Run-off Model Application on the Botonega Catchment // Proceedings of the VII International Symposium on Water Management and Hydraulic Engineering / Bednarczyk, Stefan ; Szymkiewicz, Romuald ; Suligowski, Ziemowit (ur.).
Gdansk, Poland: MISIURO, 2001. str. 79-86 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Plišić, I., Petraš, J., Sopta, L. & Holjević, D. (2001) Tank Run-off Model Application on the Botonega Catchment. U: Bednarczyk, S., Szymkiewicz, R. & Suligowski, Z. (ur.)Proceedings of the VII International Symposium on Water Management and Hydraulic Engineering.
@article{article, year = {2001}, pages = {79-86}, keywords = {"TANK" run-off model, creation, catchment area, model calibration, application}, title = {Tank Run-off Model Application on the Botonega Catchment}, keyword = {"TANK" run-off model, creation, catchment area, model calibration, application}, publisher = {MISIURO}, publisherplace = {Miedzybrodzie \v{Z}ywieckie, Poland} }
@article{article, year = {2001}, pages = {79-86}, keywords = {"TANK" run-off model, creation, catchment area, model calibration, application}, title = {Tank Run-off Model Application on the Botonega Catchment}, keyword = {"TANK" run-off model, creation, catchment area, model calibration, application}, publisher = {MISIURO}, publisherplace = {Miedzybrodzie \v{Z}ywieckie, Poland} }




Contrast
Increase Font
Decrease Font
Dyslexic Font