EFFECT OF SAMPLE DIMENSIONS AND FUSING TEMPERATURE ON COATING/BASE MATERIAL STRUCTURE OBTAINED BY FLAME SPRAYING (CROSBI ID 652410)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
ŠIMUNOVIĆ, Katica ; HAVRLIŠAN, Sara ; ŠARIĆ, Tomislav ; SVALINA, Ilija ; LUJIĆ, Roberto ; ŠIMUNOVIĆ, Goran
engleski
EFFECT OF SAMPLE DIMENSIONS AND FUSING TEMPERATURE ON COATING/BASE MATERIAL STRUCTURE OBTAINED BY FLAME SPRAYING
Flame sprayed Ni-based self-fluxing alloys are frequently used for repairing worn out parts in many industrial applications thus prolonging the service life of products. In practice, these alloys are used in sprayed and fused state. The main purpose of fusing (at temperatures higher than 1000 oC) is the densification of the coating after spraying and forming the metallurgical bond between the coating and base material. In order to investigate the influence of the fusing temperature on the structure of coating/base material system, but taking into account the dimensions of samples, two different NiBSi alloys were flame sprayed and simultaneously fused on the previously heat treated medium-carbon steel. The conclusion is drawn that the microstructure is influenced not only by high fusing temperature, but also by dimensions of the samples.
Coatings, Flame spraying, Fusing, NiBSi alloy
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
141-148.
2017.
objavljeno
Podaci o matičnoj publikaciji
ZBORNIK RADOVA/CONFERENCE PROCEEDINGS STROJARSKE TEHNOLOGIJE I KONSTRUKCIJSKI MATERIJALI/MECHANICAL TECHNOLOGIES AND STRUCTURAL MATERIALS
Jozic, Sonja ; Lela, Branimir
Split: Croatian Societv for Mechanical Technologies, Croatia
1847-7917
Podaci o skupu
7th International Conference Mechanical Technologies and Structural Materials 2017
predavanje
21.09.2017-22.09.2017
Split, Hrvatska