Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 89489

Adhesion wear resistance of heat treated steels for artillery weapon barrel


Jakopčić, Mirko; Grilec, Krešimir; Stojković, Vjekoslav
Adhesion wear resistance of heat treated steels for artillery weapon barrel // Proceedings of the 1st International Conference on Materials & Tribology 2002 : MT 2002 / Kennedy, D.M. (ur.).
Dublin: Dublin Institute of Technology, 2002. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 89489 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Adhesion wear resistance of heat treated steels for artillery weapon barrel

Autori
Jakopčić, Mirko ; Grilec, Krešimir ; Stojković, Vjekoslav

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 1st International Conference on Materials & Tribology 2002 : MT 2002 / Kennedy, D.M. - Dublin : Dublin Institute of Technology, 2002

Skup
International Conference on Materials & Tribology (1 ; 2002)

Mjesto i datum
Dublin, Republika Irska, 12-13.09.2002

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
adhesion wear resistance; heat treated steels; artillery weapon barrel

Sažetak
The paper describes the procedure and results of adhesive wear resistance tests done on the samples made of the 30CrNiMo8, 39NiCrMo3 and 42CrMo4 steels, which are suitable for artillery weapon barrel production. All samples were quenched and tempered at 50 ± ; 2 HRC. One third of samples was subsequently hard-chrome plated, and the other one third of samples was nitrated. The adhesive tribological pair was made of chosen steel and CuZn39Pb2 brass samples. The brass is used to produce the rotating band of an artillery projectile. The measured friction force FF and frictional coefficient CF were the wear intensity indicators. They were the least at nitrated samples.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekti:
0120027

Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb


Citiraj ovu publikaciju:

Jakopčić, Mirko; Grilec, Krešimir; Stojković, Vjekoslav
Adhesion wear resistance of heat treated steels for artillery weapon barrel // Proceedings of the 1st International Conference on Materials & Tribology 2002 : MT 2002 / Kennedy, D.M. (ur.).
Dublin: Dublin Institute of Technology, 2002. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Jakopčić, M., Grilec, K. & Stojković, V. (2002) Adhesion wear resistance of heat treated steels for artillery weapon barrel. U: Kennedy, D. (ur.)Proceedings of the 1st International Conference on Materials & Tribology 2002 : MT 2002.
@article{article, author = {Jakop\v{c}i\'{c}, Mirko and Grilec, Kre\v{s}imir and Stojkovi\'{c}, Vjekoslav}, editor = {Kennedy, D.}, year = {2002}, keywords = {adhesion wear resistance, heat treated steels, artillery weapon barrel}, title = {Adhesion wear resistance of heat treated steels for artillery weapon barrel}, keyword = {adhesion wear resistance, heat treated steels, artillery weapon barrel}, publisher = {Dublin Institute of Technology}, publisherplace = {Dublin, Republika Irska} }
@article{article, author = {Jakop\v{c}i\'{c}, Mirko and Grilec, Kre\v{s}imir and Stojkovi\'{c}, Vjekoslav}, editor = {Kennedy, D.}, year = {2002}, keywords = {adhesion wear resistance, heat treated steels, artillery weapon barrel}, title = {Adhesion wear resistance of heat treated steels for artillery weapon barrel}, keyword = {adhesion wear resistance, heat treated steels, artillery weapon barrel}, publisher = {Dublin Institute of Technology}, publisherplace = {Dublin, Republika Irska} }




Contrast
Increase Font
Decrease Font
Dyslexic Font